how to fix Honda Pilot Third Generation (2016-present) rear view camera not working?

Honda Pilot Third Generation (2016-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

507 words

Problem Statement

Learn how to diagnose and fix the rear view camera issue in Honda Pilot (2016-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.

Symptoms

•Rear view camera display is blank or not activating
•Camera image is distorted or unclear
•Error message displayed on the infotainment system
•No audible parking guidelines or alerts
•Backup lights working but no camera feed

Diagnostic Steps

1
Inspect the camera lens for dirt, moisture, or obstructions.
2
Check the vehicle's fuse box for a blown fuse related to the rear view camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the camera's wiring harness connections for damage or loose connectors.
5
Test the display screen functionality to confirm it is working properly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuse puller
•Microfiber cloth
•Screwdriver set
•Electrical tape

Parts Required

•Replacement rear view camera
•Replacement fuse

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for dirt, moisture, or obstructions.
2
Check the vehicle's fuse box for a blown fuse related to the rear view camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the camera's wiring harness connections for damage or loose connectors.
5
Test the display screen functionality to confirm it is working properly.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Clean Camera

Locate the rear view camera, typically mounted above the license plate.
Clean the camera lens with a microfiber cloth and appropriate cleaner to remove any obstructions.
Reconnect the battery and test the camera function.

3. Check and Replace Fuse

Locate the fuse box; typically found under the dashboard or in the engine compartment.
Refer to the vehicle's manual to identify the correct fuse for the rear view camera.
Remove the fuse with a fuse puller and inspect it.
If blown, replace it with a fuse of the same amperage.

4. Inspect Wiring and Connectors

Remove any covers or panels protecting the wiring harness leading to the camera.
Check for frayed wires, corrosion, or loose connections in the harness.
Repair or replace any damaged wiring or connectors.

5. Replace the Camera (if necessary)

If the camera is still non-functional after the above steps:
- Carefully unmount the camera from its housing.
- Disconnect the wiring harness from the camera.
- Connect the new camera to the wiring harness and mount it securely.