FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix P0302 code for misfire in my Honda Pilot YF3 (2016-2022)? - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/how to fix P0302 code for misfire in my Honda Pilot YF3 (2016-2022)?

how to fix P0302 code for misfire in my Honda Pilot YF3 (2016-2022)?

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Error Code: P0302
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
658 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Honda Pilot YF3 (2016-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough engine idle
  • •Decreased fuel efficiency
  • •Engine stalling or hesitation during acceleration
  • •Increased exhaust emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Ratchet and extensions
  • •Torque wrench
  • •Spark plug socket
  • •Fuel injector puller
  • •Multimeter

Parts Required

  • •Spark plug for cylinder 2
  • •Ignition coil for cylinder 2
  • •Fuel injector for cylinder 2

Additional Information

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative terminal of the battery to ensure safety.
  • Allow the engine to cool before beginning work.
2. Inspect and Replace Spark Plug

  1. Remove the Engine Cover (if applicable)

    • Use a socket set to remove any bolts securing the engine cover.
    • Set the cover aside in a safe place.

  2. Remove the Spark Plug

    • Locate the spark plug for cylinder 2 (refer to the owner’s manual if necessary).
    • Using a spark plug socket and ratchet, carefully unscrew and remove the spark plug.

  3. Inspect the Spark Plug

    • Check for signs of wear, fouling, or damage.
    • If the spark plug is worn, replace it with a new one specified for the Honda Pilot.
3. Inspect and Replace Ignition Coil

  1. Remove the Ignition Coil

    • Unplug the electrical connector from the ignition coil.
    • Remove the screws or bolts securing the ignition coil using a socket set.
    • Pull the ignition coil straight out of the cylinder head.

  2. Install New Ignition Coil

    • Align the new ignition coil with the mounting location and push it into place.
    • Secure it with screws or bolts and reconnect the electrical connector.
4. Check and Replace Fuel Injector

  1. Remove the Fuel Injector

    • Disconnect the fuel injector electrical connector.
    • Remove the retaining clips or bolts holding the fuel rail, if necessary.
    • Carefully pull the fuel injector from the intake manifold.

  2. Install New Fuel Injector

    • Lubricate the O-ring of the new fuel injector with clean engine oil.
    • Insert the new injector into the fuel rail or intake manifold.
    • Reattach the fuel rail and reconnect the electrical connector.
5. Reassemble and Test
  1. Reconnect Battery
    • Reconnect the negative terminal of the battery.
  2. Clear Codes
    • Use an OBD-II scanner to clear the P0302 code from the system.
  3. Test Drive
    • Take the vehicle for a test drive to ensure proper operation and that the check engine light does not reappear.