FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the Honda Pilot Third Generation (2016-present) fuel pump that won't turn on? - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/how to fix the Honda Pilot Third Generation (2016-present) fuel pump that won't turn on?

how to fix the Honda Pilot Third Generation (2016-present) fuel pump that won't turn on?

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
581 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the fuel pump not activating in Honda Pilot (2016-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Relieve fuel system pressure before servicing to prevent fuel spray.

Symptoms

  • •Engine cranks but fails to start
  • •No sound from the fuel pump when the ignition is turned on
  • •Dashboard fuel gauge may not function properly
  • •Possible check engine light illumination
  • •Fuel odor near the vehicle (if there is a leak)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Screwdrivers

Parts Required

  • •Fuel pump relay
  • •Fuel pump (if required)
  • •Fuel pump fuse

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather required tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shock.
  • Relieve fuel system pressure by removing the fuel pump relay and running the engine until it stalls.
2. Inspect and Replace the Fuel Pump Fuse
  • Locate the fuse box, typically under the dashboard or hood.
  • Remove the fuel pump fuse and check for continuity using a multimeter.
  • If the fuse is blown, replace it with a new one of the same rating.
3. Test and Replace the Fuel Pump Relay
  • Locate the fuel pump relay in the fuse box.
  • Remove the relay and test it by swapping it with a similar relay (e.g., horn relay) to see if the pump activates.
  • If the pump works with the swapped relay, replace the faulty relay with a new one.
4. Check Wiring and Connections
  • Inspect the wiring harness connected to the fuel pump for fraying, corrosion, or loose connections.
  • If damage is found, repair or replace the wiring as necessary.
  • Ensure all connectors are securely attached.
5. Replace the Fuel Pump (if necessary)
  • If the fuel pump is determined to be faulty, drain the fuel tank.
  • Remove the rear seat or access panel to reach the fuel pump assembly.
  • Disconnect the fuel lines and electrical connectors from the pump.
  • Remove the retaining ring and lift the fuel pump assembly out of the tank.
  • Install the new fuel pump by reversing the removal steps, ensuring all connections are secure.