how to fix the P0700 code on my Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

502 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Check engine light illuminated
•Harsh shifting or slipping during gear changes
•Delayed engagement when shifting from park to drive/reverse
•Transmission overheating warning
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any specific transmission codes in addition to P0700.
2
Check the transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the wiring and connectors to the transmission control module for any signs of damage or corrosion.
4
Test the transmission control module (TCM) for proper functionality using a multimeter.
5
Inspect the transmission solenoids for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Fluid pump
•Torque wrench
•Screwdrivers

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission pan gasket (if applicable)
•New transmission control module (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any specific transmission codes in addition to P0700.
2
Check the transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the wiring and connectors to the transmission control module for any signs of damage or corrosion.
4
Test the transmission control module (TCM) for proper functionality using a multimeter.
5
Inspect the transmission solenoids for proper operation.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the battery to prevent electrical shorts.
Raise the vehicle and secure it on jack stands if necessary.

2. Transmission Fluid Change

Tools Required: Socket set, fluid pump, transmission fluid.
Instructions:
1. Locate the transmission drain plug and remove it to drain old fluid into a suitable container.
2. Replace the transmission pan gasket if it shows signs of wear.
3. Reinstall the drain plug and torque to manufacturer's specifications (typically around 20 lb-ft).
4. Use a fluid pump to fill the transmission with the correct type and amount of new fluid (typically Honda ATF DW-1).

3. Inspect and Replace Transmission Control Module (if necessary)

Tools Required: Socket set, torque wrench, screwdrivers.
Instructions:
1. Locate the TCM in the vehicle (usually near the transmission or under the dashboard).
2. Disconnect the wiring harness carefully.
3. Remove TCM mounting bolts and take out the module.
4. Install the new TCM in reverse order and torque bolts to manufacturer's specification.
5. Reconnect the wiring harness securely.

4. Reconnect Battery and Clear Codes

Reconnect the battery terminals.
Use the OBD-II scanner to clear the P0700 code and any other stored codes.