how to replace the rear brakes on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

595 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Step-by-step guide on how to replace rear brakes on Honda Pilot Third Generation (2016-present). Includes symptoms, diagnostic steps, and tools required.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath it.
•Allow the brakes to cool before handling components to avoid burns.

Symptoms

•Squeaking or grinding noise when braking
•Reduced braking performance
•Vibration or pulsation felt through the brake pedal
•Warning light illuminated on the dashboard
•Brake fluid leak around the rear wheels

Diagnostic Steps

1
Inspect the brake pads for thickness using a caliper or visual inspection method.
2
Check the brake rotor surface for scoring or warping.
3
Inspect the brake caliper for fluid leaks or sticking.
4
Verify brake fluid level in the master cylinder reservoir.
5
Test the brake system by applying the brakes and observing for abnormal behavior.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Brake pad spreader
•C-clamp
•Torque wrench
•Brake cleaner

Parts Required

•New rear brake pads
•Possibly new brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake pads for thickness using a caliper or visual inspection method.
2
Check the brake rotor surface for scoring or warping.
3
Inspect the brake caliper for fluid leaks or sticking.
4
Verify brake fluid level in the master cylinder reservoir.
5
Test the brake system by applying the brakes and observing for abnormal behavior.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, socket set, brake pad spreader, C-clamp, torque wrench, brake cleaner.
Safely park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent electrical issues.

2. Raise the Vehicle

Use a jack to lift the rear of the vehicle.
Secure the vehicle on jack stands to ensure safety while working.

3. Remove the Wheel

Use a lug wrench to loosen and remove the lug nuts from the rear wheel.
Carefully remove the wheel to access the brake components.

4. Remove the Brake Caliper

Locate the caliper mounting bolts and use a socket wrench to remove them.
Carefully slide the caliper off the rotor and suspend it using a bungee cord or similar tool to avoid stressing the brake line.

5. Replace the Brake Pads

Remove the old brake pads from the caliper bracket.
If necessary, use a brake pad spreader or a C-clamp to compress the caliper piston back into the caliper housing to make room for new pads.
Install the new brake pads into the caliper bracket.

6. Reinstall the Brake Caliper

Position the caliper over the new brake pads and rotor.
Secure it by tightening the caliper mounting bolts to the manufacturer’s specified torque (usually around 20-25 ft-lbs, but check specifications).

7. Reinstall the Wheel

Place the wheel back onto the hub and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and torque the lug nuts to the manufacturer’s specifications (typically 80-100 ft-lbs).

8. Final Checks

Reconnect the negative battery terminal.
Pump the brake pedal several times to ensure proper brake pad seating.
Check brake fluid level and top off if necessary.