how to reset oil maintenance light on Honda Pilot YF4 (2023-Present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

401 words

Problem Statement

Learn how to reset the oil maintenance light on a 2023 Honda Pilot YF4 after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked in a safe location and the engine is off before performing the reset.

Symptoms

•Oil maintenance light is illuminated on the dashboard
•Vehicle displays a maintenance due message
•Reminder for oil change is displayed in the vehicle information display

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface with the engine turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical system.
3
Navigate to the vehicle settings using the steering wheel controls or the display screen.
4
Access the 'Maintenance' or 'Oil Life' menu in the settings.
5
Confirm the current oil life percentage before proceeding to reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the oil maintenance light.

Parts Required

•None required for resetting the oil maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface with the engine turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical system.
3
Navigate to the vehicle settings using the steering wheel controls or the display screen.
4
Access the 'Maintenance' or 'Oil Life' menu in the settings.
5
Confirm the current oil life percentage before proceeding to reset.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is in Park (P) mode and the engine is off.

Turn the ignition to the ON position (do not start the engine).
Use the steering wheel controls to scroll to the "Settings" or "Vehicle Settings" menu.
Select "Maintenance" or "Oil Life" from the menu options.

3. Reset Oil Maintenance Light

Highlight the "Oil Life" option on the display.
Press and hold the "Enter" button on the steering wheel or the display until you see a confirmation message.
Select "Reset" or "Yes" to confirm the reset of the oil maintenance light.

4. Verify Reset

Exit the settings menu and return to the main display.
Check that the oil maintenance light is no longer illuminated, confirming that the reset was successful.