FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the check engine light on Honda Pilot Third Generation (2016-present) - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/how to reset the check engine light on Honda Pilot Third Generation (2016-present)

how to reset the check engine light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes
30 minutes to 1 hour
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
418 words

Problem Statement

Learn how to reset the check engine light on Honda Pilot (2016-present) after repairs. Step-by-step guide with diagnostic steps and tools required.

Affected Component
Electrical
Estimated Time
30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always ensure the vehicle is turned off before working on electrical systems.
  • •If disconnecting the battery, be cautious of any stored power in the vehicle's capacitors.

Symptoms

  • •Check engine light illuminated
  • •Possible diagnostic trouble codes (DTCs) displayed
  • •No noticeable change in vehicle performance (if issue has been resolved)
  • •Engine running smoothly after repairs

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket wrench set

Parts Required

  • •None specifically needed for the reset process (ensure all repairs are completed prior).

Additional Information

Affected Component
Electrical
Estimated Time
30 minutes to 1 hour
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and locate the OBD-II port, typically under the dashboard.
  • Ensure the vehicle is parked on a flat surface and the engine is turned off.
2. Using an OBD-II Scanner
  1. Connect the OBD-II scanner to the OBD-II port.
  2. Turn on the vehicle's ignition without starting the engine (to the "ON" position).
  3. Follow the scanner's prompts to read and note any diagnostic trouble codes.
  4. After addressing any issues, select the option to clear or erase the codes.
  5. Confirm the action when prompted by the scanner.
3. Disconnecting the Battery (Alternative Method)
  1. Turn off the vehicle and remove the key from the ignition.
  2. Open the hood and locate the battery.
  3. Use a socket wrench to disconnect the negative (-) terminal of the battery.
  4. Wait for 10-15 minutes to allow the vehicle’s systems to reset.
  5. Reconnect the negative (-) terminal securely and close the hood.