how to reset the maintenance light on Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

302 words

Problem Statement

Learn how to reset the maintenance light on a Honda Pilot (2016-present) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off before attempting the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No other warning lights are present
•Service reminder notification appears on the display

Diagnostic Steps

1
Turn the vehicle off and ensure the odometer is displaying the total mileage.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Push the gas pedal three times within five seconds.
4
Check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked in a safe location and the engine is off before starting the procedure.

2. Turn Ignition On

Insert the key into the ignition or ensure the push-button start is ready.
Turn the key to the "ON" position (do not start the engine).

3. Reset Maintenance Light

With the ignition in the "ON" position, press the gas pedal three times within five seconds.
Observe the dashboard for the maintenance light; it should turn off after completing the above step.

4. Verify Reset

Turn the ignition off and then back on to confirm the maintenance light is no longer illuminated.