how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

355 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•No impact on vehicle performance or functionality

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position (without starting the engine).
2
Check the current odometer reading and note any service reminders if applicable.
3
Confirm that all maintenance has been performed, including oil change, tire rotation, or any other scheduled service.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked safely and in a stable position.

2. Access the Maintenance Light Reset

Turn the ignition to the "ON" position without starting the engine.
Use the trip meter reset button (located on the dashboard) to cycle through the options until the odometer is displayed.
Turn the ignition off.

3. Reset the Maintenance Light

While holding the trip meter reset button, turn the ignition back to the "ON" position.
Continue to hold the trip meter reset button until the maintenance light begins to blink and then turns off (this may take around 10 seconds).
Release the trip meter reset button.

4. Verify Reset

Turn the ignition off and then back to the "ON" position to confirm that the maintenance light is no longer illuminated.