how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

349 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this easy step-by-step guide. Quick and simple instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure, stationary position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification showing 'Maintenance Due' or similar message
•Odometer reading does not reset after service

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition switch to the 'Off' position.
4
Start the engine to verify if the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required, but have your owner's manual handy for reference.
Ensure the vehicle is parked securely, with the engine off.

2. Turn the Ignition On

Insert the key into the ignition and turn it to the "On" position (do not start the engine).
If the vehicle has a push-button start, press the button twice without pressing the brake pedal.

3. Reset the Maintenance Light

Quickly press the gas pedal three times within 5 seconds.
Ensure the pedal is fully pressed down during each press.

4. Turn Off the Ignition

After pressing the gas pedal, turn the ignition switch to the "Off" position.

5. Start the Engine

Start the engine to confirm the maintenance light has been reset and is no longer illuminated.