how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode and on a flat surface before beginning the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally otherwise
•Scheduled maintenance has been completed

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' or 'RUN' position without starting the engine.
2
Confirm that the maintenance has been performed as per the vehicle's service schedule.
3
Locate the 'Menu' button on the steering wheel to access the vehicle settings.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in the "ON" position without starting the engine.

Press the "Menu" button on the steering wheel.
Use the arrow keys on the steering wheel to navigate through the display screen.

3. Select Vehicle Settings

Scroll to "Vehicle Settings" using the arrow buttons.
Press "Enter" or the center button to select it.

4. Reset Maintenance Information

Navigate to "Maintenance Info" or "Maintenance Reset" option.
Select "Oil Life" or the relevant maintenance service that needs resetting.
Press and hold the "Enter" button until you see a confirmation message that the oil life has been reset to 100%.

Press the "Back" button or continue navigating until you exit the menu.
Turn off the vehicle and restart it to verify that the maintenance light is extinguished.