how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

350 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this simple step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before beginning the procedure.

Symptoms

•Maintenance light illuminated on the dashboard.
•Reminder for oil change or service displayed.
•Vehicle owner may experience confusion regarding service intervals.

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within five seconds.
3
Observe the maintenance light, which should begin to blink and then reset.
4
Turn the ignition switch to the 'OFF' position.
5
Start the engine to verify the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or key fob

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within five seconds.
3
Observe the maintenance light, which should begin to blink and then reset.
4
Turn the ignition switch to the 'OFF' position.
5
Start the engine to verify the maintenance light is off.

Solution

1. Preparation

Ensure the vehicle is parked safely with the ignition off.
Have the key fob or key ready for ignition.

2. Ignition Position

Insert the key into the ignition or have the key fob with you.
Turn the ignition to the "ON" position without starting the engine. This is typically the second position where the dashboard lights activate.

3. Pedal Action

Quickly press the gas pedal three times within five seconds. Ensure to press fully each time for proper detection.

4. Verify Reset

After the third press, observe the maintenance light. It should blink and then turn off.
Turn the ignition back to the "OFF" position.

5. Start Engine

Start the engine to confirm the maintenance light is no longer illuminated.