how to reset the maintenance light on Honda Pilot YF3 (2016-2022)?

Honda Pilot Third Generation (2016-present)

Error Codes

less than 10 minutes

Time

easy

Difficulty

low

Severity

3 min read

415 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this step-by-step guide. Quick and easy instructions for a hassle-free reset.

Affected Component

Electrical

Estimated Time

less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the parking brake is engaged before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard.
•No other warning lights are present.
•The vehicle has completed the necessary maintenance.

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is set to show the trip odometer.
3
Turn off the ignition switch.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
While holding the button, turn the ignition switch back to the 'ON' position.
6
Release the 'Select/Reset' button after the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer display is set to show the trip odometer.
3
Turn off the ignition switch.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
While holding the button, turn the ignition switch back to the 'ON' position.
6
Release the 'Select/Reset' button after the maintenance light resets.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked safely and the ignition is off.

2. Access the Ignition

Insert the key into the ignition or ensure the key fob is present for push-start models.

3. Set Odometer to Trip Display

Start the vehicle and check that the odometer is displaying the trip meter (Trip A or Trip B).
If not, press the "Select/Reset" button until it cycles to the trip display.

4. Turn Off Ignition

Turn the ignition switch to the "OFF" position to prepare for the reset process.

5. Reset the Maintenance Light

Press and hold the "Select/Reset" button on the dashboard.
While holding the button, turn the ignition switch back to the "ON" position without starting the engine.
Hold the button until the maintenance light blinks and then turns off.

6. Final Check

Release the "Select/Reset" button once the light is off.
Turn the ignition to the "OFF" position and then start the engine to verify the maintenance light is no longer illuminated.