how to reset the tire pressure light in Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

529 words

Problem Statement

Learn how to reset the tire pressure light in Honda Pilot (2016-present). Step-by-step guide with diagnostic procedures and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface when checking tire pressures.
•Always use caution when working around tires and wheels to avoid injury.

Symptoms

•Tire pressure monitoring system (TPMS) warning light is illuminated on the dashboard
•Possible under-inflation or over-inflation of tires
•Inconsistent tire pressure readings on the tire pressure gauge
•Vehicle may show a slight decrease in fuel efficiency

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge to ensure they are within the manufacturer's recommended levels.
2
Inspect all tires for visible damage or signs of air leaks.
3
Ensure the spare tire (if equipped with a TPMS sensor) is also inflated correctly, as it can trigger the warning light.
4
Verify that the TPMS sensors are functioning correctly by using an OBD-II scanner to check for error codes related to the TPMS system.
5
Confirm the vehicle has been driven for at least 10 minutes at speeds above 15 mph to allow the system to recalibrate.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•None for the reset process; however, consider replacing TPMS sensors if they are malfunctioning.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge to ensure they are within the manufacturer's recommended levels.
2
Inspect all tires for visible damage or signs of air leaks.
3
Ensure the spare tire (if equipped with a TPMS sensor) is also inflated correctly, as it can trigger the warning light.
4
Verify that the TPMS sensors are functioning correctly by using an OBD-II scanner to check for error codes related to the TPMS system.
5
Confirm the vehicle has been driven for at least 10 minutes at speeds above 15 mph to allow the system to recalibrate.

Solution

1. Preparation

Gather all necessary tools and parts for the reset process.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Have a tire pressure gauge ready to check tire pressures.

2. Check and Adjust Tire Pressures

Using a tire pressure gauge, check each tire’s pressure, including the spare.
Inflate or deflate the tires as necessary to match the recommended PSI levels specified in the owner’s manual or on the driver’s door jamb sticker.

3. Reset TPMS Light

Turn the ignition switch to the "ON" position (do not start the engine).
Locate the TPMS reset button, which is usually found beneath the steering wheel or around the fuse box area.
Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release the button.
Start the engine and allow it to run for about 20 minutes to ensure the system recalibrates.

4. Final Check

After resetting, drive the vehicle for a short distance (approximately 10 minutes) to ensure the TPMS light remains off.