FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Pilot feels like it's slipping out of gear what should I check - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/my Honda Pilot feels like it's slipping out of gear what should I check

my Honda Pilot feels like it's slipping out of gear what should I check

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
540 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Honda Pilot. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the transmission system.

Symptoms

  • •Transmission slipping during acceleration
  • •Unusual revving of the engine without corresponding vehicle speed increase
  • •Delayed or harsh shifting
  • •Check engine light illuminated
  • •Fluid leaks under the vehicle
  • •Grinding or whining noise during gear changes

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Fluid transfer pump
  • •Screwdriver set

Parts Required

  • •Transmission fluid (OEM specified)
  • •Transmission filter (if applicable)
  • •Gasket for transmission pan

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Disconnect the battery to prevent electrical shorts.
2. Check and Replace Transmission Fluid
  1. Locate the transmission dipstick and remove it.
  2. Wipe it clean and reinsert to check fluid level.
  3. If low, add the manufacturer's recommended transmission fluid to the appropriate level.
  4. If fluid is burnt or contaminated, proceed to drain and replace:
    • Remove the transmission drain plug using a socket set.
    • Allow fluid to completely drain into a suitable container.
    • Replace the drain plug and torque to manufacturer's specifications.
    • Refill the transmission with new fluid through the dipstick tube.
3. Inspect and Replace Transmission Filter (if applicable)
  1. Remove the transmission pan by unscrewing the bolts with a socket wrench.
  2. Carefully lower the pan and drain any remaining fluid.
  3. Remove the old transmission filter and install the new filter.
  4. Clean the pan and replace the gasket before reattaching the pan.
4. Test and Adjust Throttle Position Sensor
  1. Locate the TPS on the throttle body.
  2. Disconnect the electrical connector and use a multimeter to check voltage readings.
  3. Adjust the TPS according to manufacturer's specifications or replace if faulty.
5. Reconnect Battery and Test Drive
  • Reconnect the battery terminals.
  • Start the vehicle and conduct a test drive to observe any improvements or persisting issues.