why does my Honda Pilot Third Generation (2016-present) have a black screen on the dashboard

Honda Pilot Third Generation (2016-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

500 words

Problem Statement

Learn how to diagnose and fix the black screen issue on the dashboard of Honda Pilot (2016-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shock or short circuits.

Symptoms

•Dashboard display is completely black
•No indicators or warning lights are visible
•Audio or navigation systems may be unresponsive
•Possible flickering or intermittent display before complete failure
•Vehicle may exhibit issues with other electronic components

Diagnostic Steps

1
Inspect the vehicle's fuse box for blown fuses related to the dashboard display.
2
Use an OBD-II scanner to check for any error codes related to the vehicle's electrical or infotainment system.
3
Disconnect and reconnect the vehicle battery to reset the system and check if the display returns.
4
Inspect wiring harnesses and connectors for corrosion or damage that may affect the display.
5
Test the display unit and associated control modules for functionality using a multimeter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Fuse puller or needle-nose pliers
•Electrical contact cleaner
•Screwdrivers and socket set

Parts Required

•Replacement fuse (if applicable)
•Replacement dashboard display unit (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the vehicle's fuse box for blown fuses related to the dashboard display.
2
Use an OBD-II scanner to check for any error codes related to the vehicle's electrical or infotainment system.
3
Disconnect and reconnect the vehicle battery to reset the system and check if the display returns.
4
Inspect wiring harnesses and connectors for corrosion or damage that may affect the display.
5
Test the display unit and associated control modules for functionality using a multimeter.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety while working on the electronic components.

2. Inspect and Replace Fuses

Locate the fuse box in the driver’s side footwell or under the hood.
Identify the specific fuse for the dashboard display, usually indicated in the owner’s manual.
Remove the fuse using a fuse puller or needle-nose pliers.
Inspect the fuse for continuity. Replace if blown with a new fuse of the same amperage.

3. Check Wiring and Connectors

Reconnect the battery temporarily to power on the vehicle.
Inspect the wiring harness connected to the dashboard display for any signs of wear or damage.
Disconnect the connector to the display, clean it with electrical contact cleaner, and reconnect it securely.

4. Test Display Unit

If the issue persists, remove the dashboard display unit carefully.
Connect a multimeter to the display unit's power and ground wires to ensure proper voltage is being supplied.
If the voltage is correct but the display does not turn on, replace the display unit.

5. Reassemble and Test

Reassemble all components in reverse order.
Reconnect the negative battery terminal.
Start the vehicle and check if the dashboard display is functioning properly.