FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Honda Pilot Third Generation (2016-present) check engine light on - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/why is my Honda Pilot Third Generation (2016-present) check engine light on

why is my Honda Pilot Third Generation (2016-present) check engine light on

Honda Pilot Third Generation (2016-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
512 words

Problem Statement

Learn how to diagnose and fix the check engine light issue in Honda Pilot Third Generation (2016-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the oil cap or radiator.

Symptoms

  • •Check engine light illuminated
  • •Decreased fuel efficiency
  • •Rough engine idle or performance
  • •Unusual engine noises
  • •Possible engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Basic socket set
  • •Torque wrench
  • •Oil filter wrench

Parts Required

  • •Replacement gas cap (if needed)
  • •Engine oil (type specified in owner's manual)
  • •Oil filter (if oil change is performed)
  • •Replacement vacuum lines (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery negative terminal to ensure safety.
2. Code Clearance
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Retrieve and note down the error codes displayed.
  • Clear the error codes using the scanner.
3. Inspect and Replace Components

  • Gas Cap Inspection:

    • Remove the gas cap and inspect for cracks or a damaged seal.
    • Replace with a new gas cap if any damage is found.

  • Oil Check and Change:

    • Check the engine oil level using the dipstick.
    • If low, add the appropriate type of oil (refer to owner's manual).
    • If dirty, perform an oil change including filter replacement.

  • Vacuum Line Inspection:

    • Visually inspect all vacuum lines for signs of wear or disconnection.
    • Replace any damaged lines with new ones.
4. Exhaust System Check
  • Inspect the exhaust system for any visible leaks or damage.
  • If leaks are found, replace the affected sections of the exhaust.
5. Reconnect Battery
  • Reconnect the negative battery terminal.
  • Start the engine and let it idle to check for any returning issues.