how to fix Honda Pilot YF3 (2016-2022) rear suspension noise

Solution

1. Preparation

• Tools Required: Jack, jack stands, socket set, pry bar, torque wrench, impact wrench (optional).
• Ensure vehicle is parked on a level surface and secured with wheel chocks.
• Disconnect the battery if working near electrical components.

2. Raise the Vehicle

• Use a jack to lift the rear of the vehicle.
• Secure the vehicle on jack stands to ensure safety while working.

3. Inspect and Replace Components

• Shock Absorbers:

  • Remove the lower bolt securing the shock absorber using the socket set.
  • Detach the upper mount and remove the shock from the vehicle.
  • Install new shock absorbers by reversing the removal process; torque to manufacturer specifications (usually around 50 ft-lbs).

• Sway Bar Links:

  • Remove the sway bar link bolts using a socket set.
  • Replace with new sway bar links and torque to specifications (typically around 30 ft-lbs).

• Bushings and Mounts:

  • If bushings are found to be worn, remove the component (control arm, etc.) attached to the bushings.
  • Use a pry bar to extract old bushings and install new ones.
  • Reinstall the component and torque all bolts to specifications.

4. Reassemble and Lower Vehicle

• Ensure all components are tight and properly secured.
• Remove jack stands and lower the vehicle back to the ground.