how to fix P0700 code in Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

549 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission issue in Honda Pilot (2016-present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the engine and transmission to cool before starting work

Symptoms

•Check engine light illuminated
•Erratic shifting or harsh transmission shifts
•Delayed engagement when shifting from park to drive
•Transmission overheating warning
•Poor acceleration or loss of power

Diagnostic Steps

1
Scan the vehicle's OBD-II system for additional trouble codes related to the transmission
2
Inspect the transmission fluid level and condition; look for signs of contamination
3
Check the wiring and connectors to the transmission control module (TCM) for any damage or corrosion
4
Test the transmission control module with a multimeter to check for proper voltage and ground signals
5
Perform a visual inspection of the transmission for leaks or external damage

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Funnel

Parts Required

•Transmission fluid (specific type per manual)
•Transmission filter
•Gasket for transmission pan (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for additional trouble codes related to the transmission
2
Inspect the transmission fluid level and condition; look for signs of contamination
3
Check the wiring and connectors to the transmission control module (TCM) for any damage or corrosion
4
Test the transmission control module with a multimeter to check for proper voltage and ground signals
5
Perform a visual inspection of the transmission for leaks or external damage

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the battery to ensure safety while working on electrical components.

2. Replace Transmission Fluid

Drain Fluid:
- Locate the transmission fluid pan.
- Remove the drain plug and allow the fluid to drain completely.
- Dispose of the old fluid properly.
Replace Filter:
- Remove the transmission pan by unscrewing the bolts (use a socket set).
- Carefully clean the mating surfaces and remove the old filter.
- Install the new filter, ensuring it’s seated correctly.
Reinstall Pan:
- Install a new gasket on the transmission pan.
- Reattach the pan and torque the bolts to the manufacturer’s specifications (usually around 8-10 ft-lbs).
Refill Fluid:
- Use a funnel to refill the transmission with the appropriate type of fluid (check owner’s manual for specifications).
- Start the engine and let it idle to circulate the fluid.
- Check the fluid level and add more if necessary.

3. Repair Wiring Connections

Inspect Wiring:
- Examine the wiring harness for any frayed wires or damaged connectors.
- Repair or replace any damaged wiring as necessary.
Reconnect TCM:
- Ensure all connectors to the TCM are clean and securely connected.

4. Reprogram TCM (if necessary)

If a new TCM was installed or if the old one was reset, use a diagnostic scanner to reprogram the TCM according to manufacturer specifications.