how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

449 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) after routine maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is safely parked before beginning the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Service indicator message displayed on the multi-information display
•Vehicle owner manual suggests resetting maintenance light after service

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Menu' button on the steering wheel to access the multi-information display.
4
Use the arrow buttons to navigate to 'Settings' and select it.
5
Navigate to 'Maintenance' and select it to view the maintenance schedule.
6
Choose 'Oil Life' and select 'Reset' to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob (if applicable)

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Menu' button on the steering wheel to access the multi-information display.
4
Use the arrow buttons to navigate to 'Settings' and select it.
5
Navigate to 'Maintenance' and select it to view the maintenance schedule.
6
Choose 'Oil Life' and select 'Reset' to reset the maintenance light.

Solution

1. Preparation

Gather needed tools: key fob (if applicable), and ensure the vehicle is parked safely.
Safety warning: Ensure the vehicle is in 'Park' to avoid any movement during the process.

2. Turn Ignition On

Insert the key into the ignition.
Turn the key to the "ON" position but do not start the engine. If equipped with a push-button ignition, press the button without pressing the brake pedal.

Locate the "Menu" button on the steering wheel.
Press the "Menu" button to activate the multi-information display on the dashboard.

4. Navigate to Maintenance Settings

Use the arrow buttons on the steering wheel to scroll through the menu options.
Find and select "Settings" from the menu.

5. Reset Oil Life

Inside the "Settings" menu, scroll to "Maintenance."
Select "Oil Life" to view the current oil life percentage.
Press the "Reset" option to confirm the reset of the maintenance light.

6. Confirm Reset

After the reset, the oil life should display as 100%.
Turn off the ignition and remove the key.