how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

410 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe place and the engine is off before conducting the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notifications for oil change or service due
•Vehicle operating normally without any other issues

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'MENU' button on the steering wheel to access the multi-information display.
3
Use the up/down arrows to navigate to 'Vehicle Settings.'
4
Select 'Maintenance Info.'
5
Choose 'Oil Life' or the specific maintenance item to reset.
6
Press and hold the 'ENTER' button until the confirmation message appears.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the maintenance light.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'MENU' button on the steering wheel to access the multi-information display.
3
Use the up/down arrows to navigate to 'Vehicle Settings.'
4
Select 'Maintenance Info.'
5
Choose 'Oil Life' or the specific maintenance item to reset.
6
Press and hold the 'ENTER' button until the confirmation message appears.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Have the vehicle's key fob or key handy.

2. Turn Ignition ON

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine.

3. Access the Multi-Information Display

Locate the "MENU" button on the right side of the steering wheel.
Press the "MENU" button to bring up the options on the display.

4. Navigate to Vehicle Settings

Use the up/down arrows on the steering wheel to scroll through the menu.
Select "Vehicle Settings" from the options.

5. Reset Maintenance Information

Select "Maintenance Info" from the Vehicle Settings menu.
Choose "Oil Life" or the specific maintenance item that needs resetting.
Press and hold the "ENTER" button until the reset confirmation message appears.

6. Confirm Reset

Release the "ENTER" button once the confirmation message appears.
You may need to select "Yes" to confirm the reset of the maintenance light.