how to reset the maintenance light on my Honda Pilot YF3 (2016-2022)

Honda Pilot YF3 (2016-2022)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

386 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot YF3 (2016-2022) with this step-by-step guide. Quick and easy instructions for maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing this reset to prevent accidental movement.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•No engine performance issues; light is purely for maintenance indication

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Select/Reset' button on the instrument panel.
3
Turn the ignition switch to the 'ON' position without starting the engine.
4
Continue holding the 'Select/Reset' button until the maintenance light begins to blink.
5
Release the button and verify that the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Select/Reset' button on the instrument panel.
3
Turn the ignition switch to the 'ON' position without starting the engine.
4
Continue holding the 'Select/Reset' button until the maintenance light begins to blink.
5
Release the button and verify that the maintenance light turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the ignition off.
Gather necessary tools: none required for this process.

2. Resetting the Maintenance Light

Access the Instrument Panel:
- Sit in the driver's seat and locate the dashboard instrument panel.
Press and Hold the Button:
- Locate the "Select/Reset" button on the instrument panel (usually on the dashboard or near the steering wheel).
- Press and hold the "Select/Reset" button.
Turn On Ignition:
- While still holding the "Select/Reset" button, turn the ignition key to the "ON" position (do not start the engine).
Wait for the Light to Blink:
- Keep holding the button until you see the maintenance light start to blink. This typically takes about 10 seconds.
Release the Button:
- Once the light blinks, release the "Select/Reset" button. The maintenance light should turn off.