how to reset the tire pressure light on Honda Pilot Third Generation (2016-present)

Honda Pilot YF3 (2016-2022)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

411 words

Problem Statement

Learn how to reset the tire pressure light on Honda Pilot (2016-present). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when the tires are cold for accurate readings.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Inconsistent tire pressure readings when checked manually
•Possible rough ride due to under-inflated tires
•Check tire pressure light may flash intermittently

Diagnostic Steps

1
Check the tire pressures on all four tires using a tire pressure gauge.
2
Ensure that all tires are inflated to the manufacturer's recommended pressure (found on the driver’s door jamb).
3
Inspect tires for visible damage, wear, or leaks that could affect pressure.
4
Confirm that the spare tire, if equipped with a TPMS sensor, is also checked and inflated properly.
5
Use an OBD-II scanner to check for any additional TPMS related error codes.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•Sensor

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures on all four tires using a tire pressure gauge.
2
Ensure that all tires are inflated to the manufacturer's recommended pressure (found on the driver’s door jamb).
3
Inspect tires for visible damage, wear, or leaks that could affect pressure.
4
Confirm that the spare tire, if equipped with a TPMS sensor, is also checked and inflated properly.
5
Use an OBD-II scanner to check for any additional TPMS related error codes.

Solution

1. Preparation

Ensure all tires are properly inflated.
Have the vehicle in a safe location with the engine running.
Key fob or ignition key should be in the ON position without starting the engine.

2. Reset the TPMS

Locate the TPMS reset button, usually found beneath the steering column or near the fuse box.
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
Drive the vehicle at speeds above 30 mph for about 10 minutes to allow the system to recalibrate and recognize the correct tire pressures.

3. Verify the Reset

After driving, turn off the engine and restart it to check if the tire pressure light remains off.
If the light is still on, repeat the reset process.