my Honda Pilot YF4 (2023-Present) makes a popping sound when turning, what’s up

Solution

1. Preparation

• Park the vehicle on a flat surface and engage the parking brake.
• Gather tools: jack stands, socket set, and torque wrench.

2. Raise the Vehicle

• Use a jack to lift the front of the vehicle and secure it with jack stands.
• Ensure the vehicle is stable before proceeding.

3. Inspect and Replace CV Joints (if necessary)

• Sub-steps:
  • Remove the wheel on the side making noise using a socket set.
  • Inspect the CV joint boot for tears or leaks.
  • If damaged, detach the axle from the hub and remove the CV joint.
  • Replace with a new CV joint, ensuring to torque the axle nut to manufacturer specifications (typically around 150 lb-ft).

4. Check and Replace Suspension Components (if necessary)

• Sub-steps:
  • Inspect control arms and bushings for wear.
  • If damaged, remove the control arm using the socket set.
  • Install the new control arm, tightening bolts to specifications (check vehicle manual for torque values).

5. Reassemble and Lower the Vehicle

• Reattach the wheel and hand-tighten the lug nuts.
• Lower the vehicle back to the ground and torque the lug nuts to manufacturer specifications.