why does my Honda Pilot YF3 (2016-2022) make a clicking noise when starting?

Solution

1. Preparation

• Gather tools: multimeter, battery tester, socket set, wrench set, and screwdriver.
• Ensure the vehicle is in park (automatic) or neutral (manual) and the parking brake is engaged.

2. Battery Inspection

1. Clean Battery Terminals:

   • Disconnect the negative terminal first, then the positive terminal.
   • Use a wire brush to clean corrosion from the terminals and battery posts.
   • Reconnect terminals, positive first then negative.

2. Test Battery Voltage:

   • Reconnect the battery and use a multimeter to measure voltage.
   • If below 12.4 volts, consider charging or replacing the battery.

3. Starter Motor Inspection

1. Access the Starter:

   • Raise the front of the vehicle using jack stands for safety.
   • Remove any covers or components obstructing access to the starter.

2. Inspect Electrical Connections:

   • Check all wires and connections to the starter for tightness and damage.
   • Reseat connectors if loose or corroded.

3. Test the Starter:

   • Use a multimeter to check for voltage at the starter solenoid when the key is turned to the start position.
   • If voltage is present but the starter does not engage, replace the starter.

4. Final Assembly

• Reinstall any components removed during the inspection.
• Lower the vehicle and ensure all tools are removed from the engine bay.