why does my Honda Pilot YF3 (2016-2022) make a clunking noise when turning?

Solution

1. Preparation

• Gather required tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Place wheel chocks behind the rear tires for safety.

2. Inspect and Secure Suspension Components

• Tools Required: Socket set, torque wrench, jack stands
• Sub-steps:
  1. Lift the front of the vehicle using a jack and secure it with jack stands.
  2. Use a socket set to check and tighten any loose bolts on the control arms and suspension components.
  3. Inspect the sway bar links and bushings for wear; replace if necessary.

3. Check CV Joints

• Tools Required: Pliers, grease
• Sub-steps:
  1. Inspect the CV boots for any tears or leaks.
  2. If the boot is damaged, replace the CV joint or axle.
  3. Ensure the CV joint is properly greased and seated.

4. Examine Wheel Bearings

• Tools Required: Torque wrench, wheel bearing grease
• Sub-steps:
  1. Remove the front wheels.
  2. Check for play in the wheel bearings by shaking the wheel. If loose, they will need replacing.
  3. Repack or replace the wheel bearings as necessary.

5. Reassemble and Test

• Tools Required: Torque wrench
• Sub-steps:
  1. Reinstall the wheels and torque the lug nuts to the manufacturer's specifications (typically 80-100 ft-lbs).
  2. Lower the vehicle and perform a test drive to verify the repair.