Why does my Mazda CX-5 KF make a knocking noise when turning?

Mazda CX-5 KF (2017-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

415 words

Problem Statement

Discover the causes of knocking noise when turning in your Mazda CX-5 KF. Follow our diagnostic steps for effective solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

Symptoms

•Knocking or popping noise when turning the steering wheel
•Noise may be more pronounced during sharp turns or when driving over bumps
•Possible vibrations felt through the steering wheel

Diagnostic Steps

1
Safely lift the front of the vehicle using a jack and secure it with jack stands
2
Inspect the CV joints for any visible damage or torn boots
3
Check the suspension components (control arms, bushings, struts) for wear or damage
4
With the vehicle lifted, rotate the front wheels by hand while observing the CV joints for any unusual movement or noise
5
Inspect the steering rack and tie rod ends for play or damage

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Pry bar
•OBD-II scanner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Safely lift the front of the vehicle using a jack and secure it with jack stands
2
Inspect the CV joints for any visible damage or torn boots
3
Check the suspension components (control arms, bushings, struts) for wear or damage
4
With the vehicle lifted, rotate the front wheels by hand while observing the CV joints for any unusual movement or noise
5
Inspect the steering rack and tie rod ends for play or damage

Solution

A knocking noise when turning in your Mazda CX-5 KF (2017-2024) can be indicative of several potential issues, typically related to the suspension or drivetrain components. Here’s how to diagnose and address the problem:

Tools Required:

Jack and jack stands
Socket set
Torque wrench
Pry bar (for checking component play)
OBD-II scanner (to check for any related error codes)

Parts/Components That May Need Replacement:

CV joints or CV axle assembly
Control arm bushings
Sway bar links
Strut mounts
Tie rod ends

Estimated Time for Repair:

Visual Inspection: 30 minutes
CV Joint Replacement: 2-3 hours
Suspension Component Replacement: 1-2 hours per component
Steering Component Replacement: 1-2 hours

Safety Warnings:

Always ensure the vehicle is securely lifted and supported with jack stands before working underneath.
Wear safety glasses and gloves to protect against debris and sharp edges.
Be cautious of hot components if the vehicle has been running.

Conclusion:

If you identify any worn or damaged components during your inspection, replace them as necessary. If the problem persists after addressing these areas, further diagnosis may be required, potentially involving a professional technician.