FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Porsche/Cayenne/E3 (2018-Present)/how to fix P0700 code in Porsche Cayenne E3 (2018-Present)

how to fix P0700 code in Porsche Cayenne E3 (2018-Present)

Porsche Cayenne E3 (2018-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission fault in Porsche Cayenne E3. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening the transmission fluid reservoir.

Symptoms

  • •Check engine light illuminated
  • •Transmission may not shift properly
  • •Rough or harsh shifting
  • •Loss of power during acceleration
  • •Decreased fuel efficiency
  • •Vehicle may enter limp mode

Diagnostic Steps

  1. 1Scan the vehicle with an OBD-II scanner to confirm fault codes and retrieve additional transmission-related codes.
  2. 2Inspect the transmission fluid level and quality; check for contamination or burnt smell.
  3. 3Check the wiring and connectors to the transmission control module (TCM) for damage or corrosion.
  4. 4Perform a visual inspection of the transmission for any external leaks.
  5. 5Test the vehicle’s battery and charging system to ensure proper voltage supply to the TCM.
  6. 6Clear the codes and take the vehicle for a test drive to see if the P0700 code returns.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.

2. Transmission Fluid Check and Replacement

  • Sub-steps:

    1. Locate the transmission dipstick or fill plug.
    2. Remove the dipstick or fill plug and check the fluid level.
    3. If fluid is low, add the recommended transmission fluid (Porsche ATF).
    4. If fluid is dirty or burnt, drain the transmission fluid and replace it.
    5. Refill with the correct amount of new transmission fluid.

  • Tools Required:

    • Transmission fluid pump
    • Socket set
    • Torque wrench

3. Inspect and Repair Wiring

  • Sub-steps:

    1. Visually inspect the wiring harness connected to the TCM for frays, corrosion, or damage.
    2. Use a multimeter to check for continuity and proper voltage at the TCM connectors.
    3. Repair or replace any damaged wiring or connectors as necessary.

  • Tools Required:

    • Multimeter
    • Wire strippers/crimpers

4. TCM Reset

  • Sub-steps:

    1. Reconnect the battery.
    2. Use the OBD-II scanner to clear the P0700 code and any related transmission codes.
    3. Start the vehicle and allow it to idle for a few minutes.

  • Tools Required:

    • OBD-II scanner

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Transmission fluid pump
  • Socket set
  • Torque wrench
  • Multimeter
  • Wire strippers/crimpers

Parts Required

  • Porsche ATF (transmission fluid)
  • Wiring harness or connectors (if damaged)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

6 items

Parts

2 items

Related Faults

  1. how to fix the brake pedal going to the floor in Porsche Cayenne E3 (2018-Present)

    Learn how to diagnose and fix the brake pedal going to the floor in Porsche Cayenne E3 (2018-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes5 symptoms

  2. my Porsche Cayenne E3 (2018-Present) is making a knocking sound when starting

    Learn how to diagnose and fix knocking sound during startup in Porsche Cayenne E3. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  3. my Porsche Cayenne E3 (2018-Present) has a rough idle when I start it in the morning, what’s wrong?

    Learn how to diagnose and fix rough idle issues in Porsche Cayenne E3 (2018-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  4. how to fix the torque converter issues in my Porsche Cayenne E3 (2018-Present)

    Learn how to diagnose and fix torque converter issues in your 2018 Porsche Cayenne E3. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms

  5. how to diagnose a transmission slipping issue in my Porsche Cayenne E3 (2018-Present)

    Learn how to diagnose and fix transmission slipping issues in Porsche Cayenne E3. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  6. how to reset the service light on Porsche Cayenne E3 (2018-Present)

    Learn how to reset the service light on your Porsche Cayenne E3 (2018-Present) with this step-by-step guide. Ensure your vehicle is ready for the road.

    Electrical3 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation