FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Porsche/Cayenne/E3 (2018-Present)/Porsche Cayenne E3 (2018-Present) error code P0700, what does it mean?

Porsche Cayenne E3 (2018-Present) error code P0700, what does it mean?

Porsche Cayenne E3 (2018-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
495 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Porsche Cayenne E3. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before checking transmission fluid levels.

Symptoms

  • •Check engine light illuminated
  • •Unusual shifting patterns or harsh shifts
  • •Delayed engagement when shifting into gear
  • •Transmission slipping or failing to engage
  • •Decreased fuel efficiency
  • •Potential overheating of the transmission

Diagnostic Steps

  1. 1Scan for transmission-related error codes using an OBD-II scanner for more specific codes.
  2. 2Inspect the transmission fluid level and condition, looking for discoloration or burnt smell.
  3. 3Check for any visible leaks around the transmission and associated components.
  4. 4Examine the wiring harness and connectors leading to the transmission control module (TCM) for damage or corrosion.
  5. 5Test the transmission fluid temperature using a multimeter to ensure it operates within normal parameters.
  6. 6Perform a road test to observe transmission behavior under various conditions.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is turned off.
  • Disconnect the negative terminal of the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

  • Sub-steps:
    1. Remove the transmission fluid dipstick and check fluid level.
    2. If fluid is low, add the appropriate type (Porsche ATF) until it reaches the correct level.
    3. If the fluid is discolored or burnt, drain the old fluid by removing the drain plug.
    4. Replace with new ATF fluid as specified in the owner's manual.
  • Tools Required: Socket set, fluid pump, transmission fluid.

3. Inspect and Repair Wiring

  • Sub-steps:
    1. Visually inspect the wiring harness for any signs of wear, fraying, or damage.
    2. Use a multimeter to check for continuity and voltage at the TCM connector.
    3. Repair or replace any damaged wiring or connectors as necessary.
  • Tools Required: Multimeter, soldering kit (if repairs are needed).

4. Reset Transmission Control Module

  • Sub-steps:
    1. Reconnect the negative battery terminal.
    2. Use the OBD-II scanner to clear the P0700 code and any related transmission codes.
    3. Start the vehicle and allow it to run for a few minutes, then perform a road test.
  • Tools Required: OBD-II scanner.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Multimeter
  • Fluid pump

Parts Required

  • Porsche-approved ATF fluid
  • Wiring harness or connectors (if repairs are needed)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

4 items

Parts

2 items

Related Faults

  1. why does my Porsche Cayenne E3 (2018-Present) have a knocking noise at idle

    Discover how to diagnose and fix knocking noise at idle in Porsche Cayenne E3 (2018-Present). Step-by-step guide with symptoms and solutions.

    Engine5 symptoms

  2. how to troubleshoot a dead battery issue in Porsche Cayenne E3 (2018-Present)

    Learn how to troubleshoot and fix a dead battery issue in Porsche Cayenne E3 (2018-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical6 symptoms

  3. why does my Porsche Cayenne E3 (2018-Present) air conditioning blow warm air

    Complete guide to fixing AC that blows warm air in Porsche Cayenne E3. Includes symptoms, diagnostic steps, tools required, and repair procedures.

    HVAC6 symptoms

  4. my Porsche Cayenne E3 (2018-Present) has a delayed throttle response what's wrong

    Learn how to diagnose and fix delayed throttle response in Porsche Cayenne E3. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  5. how to reset the tire pressure monitoring system on my Porsche Cayenne E3 (2018-Present)

    Learn how to reset the TPMS on your Porsche Cayenne E3 (2018-Present). Step-by-step instructions to resolve tire pressure monitoring issues effectively.

    Electrical4 symptoms

  6. how to fix the fuel door not opening on Porsche Cayenne E3 (2018-Present)

    Learn how to diagnose and fix the fuel door not opening issue on Porsche Cayenne E3 (2018-present). Step-by-step guide with diagnostic procedures and repair instructions.

    Body/Interior5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation