why does my Porsche Cayenne E3 (2018-Present) make a knocking noise when I accelerate

Solution

1. Preparation

• Tools Required: OBD-II scanner, jack and jack stands, socket set, torque wrench, pry bar.
• Ensure vehicle is on a flat surface and securely lifted with jack stands.
• Disconnect the battery to prevent any electrical shock.

2. Inspect Drivetrain

• Sub-steps:
  1. Raise the vehicle and securely support it on jack stands.
  2. Visually inspect the drive shafts and CV joints for cracks or damage.
  3. Rotate the drive shafts and listen for any unusual sounds.
  4. Check for signs of leaks in the differential area.
• Safety Warnings: Ensure the vehicle is stable on jack stands before working underneath.

3. Check Engine and Transmission Mounts

• Sub-steps:
  1. Locate the engine and transmission mounts.
  2. Use a pry bar to check for excessive movement in the mounts.
  3. If mounts are cracked or worn, remove the old mounts using a socket set.
  4. Install new mounts and torque to manufacturer specifications.

4. Inspect Suspension Components

• Sub-steps:
  1. Check each suspension component visually and with a pry bar for play or wear.
  2. For any damaged components, remove and replace them as necessary.
  3. Reassemble and torque all bolts to manufacturer specifications.