how do I reset the maintenance light on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

306 words

Problem Statement

Learn how to reset the maintenance light on your Ram 1500 DT (2019-Present) after maintenance. Step-by-step guide for a quick reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent any movement during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Engine oil change performed
•Tire rotation completed
•Air filter replaced

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the dashboard for the maintenance light to turn off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked on a flat surface and the gear is in "Park."

2. Access the Ignition

Insert the vehicle key into the ignition or ensure the key fob is present.
Turn the ignition to the "On" position without starting the engine.

3. Reset the Maintenance Light

Quickly press the gas pedal three times, ensuring each press is deliberate and within 10 seconds.
Watch the dashboard; the maintenance light should turn off if the reset is successful.

4. Turn Off the Ignition

Turn the ignition off completely after the light has been reset.
Wait a few moments before starting the engine to ensure the reset is complete.