FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to diagnose and fix a P0141 code in my Ram 1500 DT (2019-Present)?

how to diagnose and fix a P0141 code in my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01411-2 hours
3 min read
497 words

Problem Statement

Learn how to diagnose and fix P0141 oxygen sensor circuit issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0141
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the exhaust system to cool before handling components to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Decreased fuel efficiency
  • •Engine stalling or hesitation during acceleration
  • •Rough idle or poor engine performance
  • •Increased emissions

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0141 code is present.
  2. 2Inspect the wiring and connectors for the downstream oxygen sensor for any visible damage or corrosion.
  3. 3Check the oxygen sensor heater circuit using a multimeter to measure the resistance.
  4. 4Test the voltage supply to the oxygen sensor heater circuit to ensure proper power is reaching the sensor.
  5. 5Inspect the exhaust system for leaks that could affect sensor readings.
  6. 6Clear the error codes and perform a test drive to see if the P0141 code returns.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.

2. Remove the Oxygen Sensor

  • Locate the downstream oxygen sensor (sensor 2) on the exhaust system.
  • Using an oxygen sensor socket or wrench, carefully unscrew the sensor from its mounting location.
  • Disconnect the electrical connector from the oxygen sensor.

3. Inspect and Test the Wiring

  • Visually inspect the wiring and connectors for any signs of damage or corrosion.
  • Use a multimeter to test the resistance of the wiring to ensure it is within specifications (typically around 6-12 ohms).
  • If the wiring is damaged, replace it with new wiring, ensuring proper connections.

4. Replace the Oxygen Sensor

  • Install the new downstream oxygen sensor by screwing it into place.
  • Reconnect the electrical connector securely.
  • Ensure that the sensor is torqued to the manufacturer's specifications (typically 30-35 ft-lbs).

5. Reconnect the Battery and Test Drive

  • Reconnect the vehicle’s battery.
  • Start the engine and let it idle for a few minutes.
  • Perform a test drive to ensure proper function and to verify that the check engine light does not return.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oxygen sensor socket or wrench
  • •Multimeter
  • •Torque wrench

Parts Required

  • •New downstream oxygen sensor (sensor 2)
  • •Replacement wiring (if damaged)

Additional Information

Error Code
P0141
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) smell like burning oil

    Learn how to diagnose and fix the burning oil smell in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Engine5 symptoms

  2. my Ram 1500 is hard to start when cold what's the issue

    Learn how to diagnose and fix cold start issues in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  3. how to tell if my Ram 1500 DT (2019-Present) fuel pump is failing

    Learn how to diagnose and fix fuel pump issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  4. my Ram 1500 loses RPMs while driving what's the problem

    Learn how to diagnose and fix engine RPM loss in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Engine6 symptoms

  5. how to diagnose a rough idle in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix rough idle issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  6. how to troubleshoot my Ram 1500 DT (2019-Present) that won’t start after sitting

    Learn how to troubleshoot and fix a no-start condition in the 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation