FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to diagnose U0420 code on my Ram 1500 DT (2019-Present)?

how to diagnose U0420 code on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: U04202-4 hours
3 min read
527 words

Problem Statement

Learn how to diagnose and fix U0420 code related to Body Control Module issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
U0420
Affected Component
Electrical
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to avoid shorts or shocks.
  • ⚠Allow the vehicle's electrical system to discharge before handling any components.

Symptoms

  • •Check engine light illuminated
  • •Inconsistent power door lock operation
  • •Malfunctioning interior lights
  • •Non-functional power windows
  • •Inoperative climate control settings
  • •Erratic dashboard gauge readings

Diagnostic Steps

  1. 1Scan the vehicle with an OBD-II scanner to confirm the U0420 code and check for any additional codes.
  2. 2Inspect the wiring harness and connectors between the BCM and the affected components for physical damage or corrosion.
  3. 3Test the BCM's power and ground circuits to ensure it is receiving proper voltage and grounding.
  4. 4Verify the functionality of the affected components (e.g., power windows, locks) to identify if they are operational.
  5. 5Check for any software updates or recalls that may pertain to the BCM.
  6. 6Perform a visual inspection of the vehicle's fuses related to the BCM and the affected systems.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the vehicle's battery before starting work.
  • Ensure a clean workspace.

2. Inspect Wiring and Connectors

  • Tools Required: Multimeter, flashlight
  • Check for damaged or corroded wiring harness leading to the BCM.
  • Use a multimeter to test continuity on the wires to ensure there are no breaks.
  • Clean any corrosion on connectors using electrical contact cleaner.

3. Test BCM Power and Ground

  • Tools Required: Multimeter
  • Locate the BCM (typically under the dash).
  • With the battery connected, measure voltage at the BCM power terminal (should be around 12V).
  • Check the ground connection to ensure it has less than 0.5 ohms resistance.

4. Component Functionality Check

  • Test each component tied to the BCM (e.g., power windows, locks) to ensure they operate correctly.
  • If any components fail, replace them as needed.

5. BCM Reprogramming or Replacement

  • If all tests are satisfactory but the U0420 code persists, consider reprogramming the BCM using a scan tool capable of software updates.
  • If the BCM is determined to be faulty after testing, replace it and follow the manufacturer's reprogramming procedure.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Electrical contact cleaner
  • •Basic hand tools (screwdrivers, socket set)

Parts Required

  • •Body Control Module (if replacement is necessary)
  • •Electrical connectors (if damaged)

Additional Information

Error Code
U0420
Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

  1. my Ram 1500 DT (2019-Present) is shaking at idle what should I do

    Learn how to diagnose and fix engine shaking at idle in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  2. why does my Ram 1500 DT (2019-Present) lose coolant without any visible leaks?

    Discover how to diagnose and fix coolant loss issues in the 2019-Present Ram 1500 DT. Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Cooling System5 symptoms

  3. my Ram 1500 DT (2019-Present) makes a whining noise when in gear, what's wrong?

    Learn how to diagnose and fix whining noise in gear for 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  4. how to fix Ram 1500 DT (2019-Present) check engine light P0420 code

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

  5. why does my Ram 1500 DT (2019-Present) have a check engine light after oil change

    Learn how to diagnose and fix the check engine light issue after an oil change in a Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms

  6. what causes the P0420 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation