FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix a P0740 torque converter issue on my Ram 1500 DT (2019-Present)

how to fix a P0740 torque converter issue on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07402-4 hours
3 min read
539 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0740 torque converter issues in Ram 1500 DT (2019-present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0740
Affected Component
Transmission
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine and transmission to cool before opening the transmission pan.

Symptoms

  • •Check engine light illuminated
  • •Transmission slipping or harsh shifting
  • •Poor acceleration or loss of power
  • •Overheating transmission
  • •Increased fuel consumption
  • •Unusual engine RPM fluctuations at highway speeds

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0740 code.
  2. 2Inspect transmission fluid level and condition; ensure it is at the correct level and not burnt or contaminated.
  3. 3Check the vehicle’s wiring harness and connectors for the torque converter clutch solenoid for any signs of damage or corrosion.
  4. 4Test the torque converter clutch solenoid operation using a multimeter to verify it is functioning within specifications.
  5. 5Perform a road test to observe transmission behavior and verify symptoms.
  6. 6Inspect for any signs of leaks in the transmission or related components.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

  • Tools Required: Transmission fluid pump, funnel, socket set.
  • Remove the transmission pan using a socket set, ensuring to catch any fluid in a drain pan.
  • Inspect the pan for metal shavings or debris; clean or replace as necessary.
  • Replace the transmission filter if applicable.
  • Reinstall the pan with a new gasket and torque bolts to manufacturer specifications.
  • Fill the transmission with the appropriate type and amount of fluid according to the owner's manual.

3. Inspect and Replace Torque Converter Clutch Solenoid

  • Tools Required: Socket set, torque wrench, multimeter.
  • Locate the torque converter clutch solenoid (typically found on the transmission).
  • Disconnect the electrical connector and remove the solenoid from its mounting.
  • Test the solenoid with a multimeter to ensure it meets manufacturer specifications.
  • Replace the solenoid if it is defective by installing the new one in reverse order of removal, ensuring it is securely fastened and the connector is reattached.

4. Reconnect Battery and Clear Codes

  • Reconnect the battery terminals securely.
  • Use the OBD-II scanner to clear the P0740 code from the engine control module.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Transmission fluid pump
  • •Socket set
  • •Multimeter
  • •Torque wrench
  • •Drain pan

Parts Required

  • •Transmission fluid (specific to model)
  • •Transmission filter (if applicable)
  • •Torque converter clutch solenoid (if defective)

Additional Information

Error Code
P0740
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

  1. how to fix Ram 1500 DT (2019-Present) transfer case problems

    Learn how to diagnose and fix transfer case problems in the 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  2. my Ram 1500 DT (2019-Present) is overheating, what should I check

    Learn how to diagnose and fix overheating issues in the 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Cooling System6 symptoms

  3. how to tell if my Ram 1500 DT (2019-Present) fuel pump is failing

    Learn how to diagnose and fix fuel pump issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  4. my Ram 1500 DT (2019-Present) is shaking at idle what should I do

    Learn how to diagnose and fix engine shaking at idle in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  5. my Ram 1500 makes a loud noise when hitting bumps what could it be

    Learn how to diagnose and fix loud noise when hitting bumps in Ram 1500. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  6. how to fix Ram 1500 DT (2019-Present) steering wheel vibration

    Learn how to diagnose and fix steering wheel vibration in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Steering5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation