FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix B1C20 code in my Ram 1500 DT (2019-Present) for the body control module?

how to fix B1C20 code in my Ram 1500 DT (2019-Present) for the body control module?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: B1C202-4 hours
3 min read
542 words

Problem Statement

Learn how to diagnose and fix B1C20 code related to the Body Control Module in Ram 1500 DT. Step-by-step guide with symptoms and repair instructions.

Error Code
B1C20
Component
Electrical
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to prevent shocks or shorts.
  • ⚠Allow the vehicle to cool before accessing any components to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Power windows malfunctioning
  • •Door locks unresponsive
  • •Interior lights not functioning correctly
  • •Remote keyless entry issues
  • •Warning chimes not activating

Diagnostic Steps

  1. 1Use an OBD-II scanner to confirm the presence of the B1C20 code and any additional codes.
  2. 2Inspect the left front door wiring harness for any visible damage or corrosion.
  3. 3Check the left front door switch for proper operation.
  4. 4Test the Body Control Module (BCM) for proper communication with other modules using a scan tool.
  5. 5Verify the integrity of fuses related to the door controls in the fuse box.
  6. 6Inspect the left front door actuator for proper function.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to avoid electrical shorts.
  • Ensure you have a clean workspace.

2. Inspect Wiring and Connectors

  • Tools Required: Multimeter, wire strippers
  • Check the wiring harness for continuity and any signs of wear or damage.
  • If damaged, repair the wiring using appropriate connectors and splice techniques.
  • Make sure all connectors are securely attached and free of corrosion.

3. Replace Faulty Components

  • Tools Required: Socket set, screwdriver set
  • If the left front door switch is faulty, remove the door panel:
    • Use a trim tool to carefully pry off the door panel without damaging clips.
    • Unplug the switch connector and replace the switch.
  • If the door actuator is defective, remove it:
    • Detach any necessary components to access the actuator.
    • Install the new actuator and reassemble the door.

4. Reprogram BCM (if necessary)

  • Tools Required: Diagnostic scan tool
  • If the BCM requires reprogramming after repairs:
    • Connect the scan tool and follow the manufacturer's instructions to reprogram the BCM.
    • Clear the DTC codes and test the system.

5. Reassemble and Test

  • Reattach the door panel and ensure all clips and screws are secure.
  • Reconnect the battery and start the vehicle.
  • Test all affected functions, including door locks, windows, and interior lights.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Trim tool
  • Socket set
  • Screwdriver set

Parts Required

  • Left front door switch (if faulty)
  • Door actuator (if faulty)

Additional Information

Error CodeB1C20
Component

Electrical

Repair Time

2-4 hours

Difficulty

medium

Severity

medium

Tools

5 items

Parts

2 items

Related Faults

  1. my Ram 1500 DT (2019-Present) won’t shift into gear, what should I do

    Learn how to diagnose and fix transmission issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  2. my Ram 1500 is pulling to one side while driving what's wrong

    Learn how to diagnose and fix your Ram 1500 pulling to one side while driving. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  3. how to diagnose electrical problems in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix electrical problems in your 2019-Present Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical6 symptoms

  4. why does my Ram 1500 DT (2019-Present) dashboard light flicker

    Learn how to diagnose and fix dashboard light flickering in 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  5. my Ram 1500 DT (2019-Present) makes a whining noise when in gear, what's wrong?

    Learn how to diagnose and fix whining noise in gear for 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  6. why is my Ram 1500 DT (2019-Present) transmission fluid brown

    Learn why your 2019 Ram 1500 DT has brown transmission fluid and how to fix it. Step-by-step guide with diagnostic steps and repair instructions.

    Transmission5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation