how to fix my Ram 1500 DT (2019-Present) shaking when accelerating

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

533 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted on jack stands before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Shaking or vibrations felt through the steering wheel and seat during acceleration
•Increased noise from the drivetrain
•Uneven tire wear
•Possible check engine light illuminated
•Difficulty maintaining speed

Diagnostic Steps

1
Inspect tires for proper inflation and visual damage.
2
Check wheel alignment and balance.
3
Perform a visual inspection of the suspension components for wear or damage.
4
Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner.
5
Inspect the driveshaft and U-joints for play or damage.
6
Test the engine and transmission mounts for signs of wear or failure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Jack
•Jack stands
•Lug wrench
•Wheel alignment machine
•Torque wrench
•Socket set
•Pry bar

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•Driveshaft (if damaged)
•Engine and transmission mounts (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for proper inflation and visual damage.
2
Check wheel alignment and balance.
3
Perform a visual inspection of the suspension components for wear or damage.
4
Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner.
5
Inspect the driveshaft and U-joints for play or damage.
6
Test the engine and transmission mounts for signs of wear or failure.

Solution

1. Preparation

Gather required tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if necessary for safety.

2. Tire Inspection and Maintenance

Tools Required: Tire pressure gauge, jack, jack stands, lug wrench
Check tire pressures with a gauge; inflate to recommended levels.
Inspect tires for uneven wear patterns; replace if necessary.
If tires are damaged, replace them with OEM or quality aftermarket tires.

3. Wheel Alignment and Balance

Tools Required: Wheel alignment machine, torque wrench
Use a wheel alignment machine to check alignment.
Adjust as necessary to bring the vehicle back to factory specifications.
Balance tires if necessary.

4. Suspension Component Inspection

Tools Required: Jack, jack stands, socket set
Lift the vehicle and secure it on jack stands.
Inspect shock absorbers, struts, control arms, and bushings for wear.
Replace any damaged components with OEM parts.

5. Driveshaft and U-Joint Inspection

Tools Required: Socket set, pry bar
Inspect the driveshaft for any visible damage or excessive rust.
Check U-joints for play by wiggling them; replace if any movement is detected.
If the driveshaft is damaged, replace it with an OEM replacement.

6. Engine and Transmission Mounts

Tools Required: Socket set, torque wrench
Inspect the engine and transmission mounts for cracks or excessive wear.
Replace mounts if they are damaged, ensuring to torque the new mounts to the manufacturer’s specifications.