FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0130 code in Ram 1500 DT (2019-Present)

how to fix P0130 code in Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01301-2 hours
3 min read
484 words

Problem Statement

Learn how to diagnose and fix P0130 oxygen sensor circuit issue in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool down before working on exhaust components to prevent burns.

Symptoms

  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough engine idle
  • •Increased exhaust emissions
  • •Engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0130 and check for any additional codes.
  2. 2Inspect the wiring and connectors for the upstream oxygen sensor for damage or corrosion.
  3. 3Measure the voltage output from the upstream oxygen sensor with a multimeter.
  4. 4Check the engine coolant temperature sensor for proper operation, as it can affect the O2 sensor readings.
  5. 5Inspect the exhaust system for leaks that could cause erratic readings from the O2 sensor.
  6. 6Verify that the air-fuel mixture is correct by checking fuel pressure and injector performance.

Solution

Solution

1. Preparation

  • Gather tools and parts required for the repair.
  • Disconnect the battery to ensure safety during the repair process.

2. Inspect and Replace Oxygen Sensor

  1. Locate the Oxygen Sensor:

    • Find the upstream oxygen sensor (usually located in the exhaust manifold or just after it).

  2. Remove the Oxygen Sensor:

    • Use an oxygen sensor socket to carefully unscrew the sensor from the exhaust pipe.
    • Disconnect the electrical connector from the sensor.

  3. Inspect the Wiring and Connector:

    • Check the connector for corrosion or damage. If damaged, repair or replace the wiring as necessary.

  4. Install the New Oxygen Sensor:

    • Apply anti-seize compound to the threads of the new oxygen sensor (if required).
    • Screw the new sensor into the exhaust pipe and tighten it to the manufacturer’s torque specification (usually around 30-40 lb-ft).

  5. Reconnect Electrical Connector:

    • Attach the electrical connector to the new oxygen sensor securely.

3. Reconnect Battery and Clear Codes

  • Reconnect the battery terminals and ensure they are tight.
  • Use the OBD-II scanner to clear the P0130 code from the vehicle’s computer.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oxygen sensor socket
  • •Multimeter
  • •Torque wrench

Parts Required

  • •Upstream oxygen sensor (specific to vehicle make and model)

Additional Information

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
1 item

Related Faults

  1. my Ram 1500 DT (2019-Present) won't start and just clicks, what to do

    Learn how to diagnose and fix the no-start issue in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical6 symptoms

  2. my Ram 1500 DT (2019-Present) makes a whining noise when in gear, what's wrong?

    Learn how to diagnose and fix whining noise in gear for 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms

  3. why does my Ram 1500 DT (2019-Present) feel like it's losing power while driving

    Learn how to diagnose and fix loss of power issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  4. why is my Ram 1500 DT (2019-Present) transmission fluid brown

    Learn why your 2019 Ram 1500 DT has brown transmission fluid and how to fix it. Step-by-step guide with diagnostic steps and repair instructions.

    Transmission5 symptoms

  5. how to fix transmission slipping in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix transmission slipping in your 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  6. how to fix leaking transmission fluid Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix leaking transmission fluid in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation