FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0301 misfire code in Ram 1500 DT (2019-Present)

how to fix P0301 misfire code in Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03012-4 hours
4 min read
601 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool down before performing any work to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine shaking
  • •Decreased acceleration or power
  • •Increased fuel consumption
  • •Unusual engine noises, such as knocking or popping

Diagnostic Steps

  1. 1Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0301 code and check for any additional trouble codes.
  2. 2Inspect the condition of the spark plug in cylinder 1 for wear, damage, or improper gap.
  3. 3Check the ignition coil for cylinder 1 to ensure it is functioning correctly.
  4. 4Perform a compression test on cylinder 1 to rule out mechanical issues such as low compression.
  5. 5Inspect fuel injectors for proper operation and any signs of clogging or leaks.
  6. 6Check for vacuum leaks around the intake manifold and associated hoses.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Compression tester
  • Fuel injector cleaning kit (if necessary)

2. Replace Spark Plug

  1. Remove the ignition coil from cylinder 1 by unscrewing the retaining bolts.
  2. Disconnect the electrical connector from the ignition coil.
  3. Remove the spark plug using a spark plug socket and ratchet.
  4. Inspect the old spark plug for wear and ensure it is gapped correctly (check specifications for gap size).
  5. Install a new spark plug, ensuring it is properly gapped.
  6. Reinstall the ignition coil and connect the electrical connector securely.

3. Test Ignition Coil

  1. If the spark plug replacement doesn't resolve the issue, swap the ignition coil from cylinder 1 with another cylinder.
  2. Clear the trouble codes from the ECU using the OBD-II scanner.
  3. Start the engine and check if the P0301 code returns or if a misfire code appears for the cylinder to which the coil was moved.

4. Inspect and Clean Fuel Injector (if necessary)

  1. If misfire persists, remove the fuel injector from cylinder 1.
  2. Use a fuel injector cleaning kit to clean the injector or replace it if it's found to be defective.
  3. Reinstall the fuel injector, ensuring it is seated correctly and connected.

5. Compression Test

  1. If the misfire continues after checking the ignition and fuel system, perform a compression test on cylinder 1.
  2. If compression is low, further investigation into potential internal engine issues (like valve problems or piston damage) is necessary.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Compression tester
  • Fuel injector cleaning kit

Parts Required

  • Spark plug (for cylinder 1)
  • Ignition coil (if faulty)
  • Fuel injector (if clogged or damaged)

Additional Information

Error CodeP0301
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. how to clear the check engine light on my Ram 1500 DT (2019-Present)

    Learn how to clear the check engine light on your Ram 1500 DT (2019-present) with this step-by-step guide. Diagnose and reset the CEL effectively.

    Engine5 symptoms

  2. how to fix Ram 1500 DT (2019-Present) torque converter shudder

    Learn how to diagnose and fix torque converter shudder in 2019-Present RAM 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms

  3. my Ram 1500 DT (2019-Present) won't shift into gear what could be wrong

    Learn how to diagnose and fix transmission shifting issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms

  4. why does my Ram 1500 DT (2019-Present) exhaust smell like gasoline

    Learn how to diagnose and fix gasoline smell from exhaust in 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System6 symptoms

  5. how to fix the brakes on my Ram 1500 DT (2019-Present) that go to the floor

    Learn how to fix the brake pedal sinking issue in 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

    Brakes5 symptoms

  6. my Ram 1500 has a soft brake pedal what's causing it

    Learn how to diagnose and fix a soft brake pedal in Ram 1500. Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation