FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0420 code on my Ram 1500 DT (2019-Present)

how to fix P0420 code on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P04202-4 hours
3 min read
511 words

Problem Statement

Learn how to diagnose and fix P0420 exhaust system issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0420
Component
Exhaust System
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow the exhaust system to cool before performing inspections or repairs.

Symptoms

  • •Check engine light illuminated
  • •Decreased engine performance
  • •Poor fuel economy
  • •Sulfur smell from exhaust
  • •Increased emissions

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0420 code.
  2. 2Inspect the exhaust system for any visible leaks, especially before the catalytic converter.
  3. 3Check the condition of the upstream (pre-catalytic converter) and downstream (post-catalytic converter) oxygen sensors.
  4. 4Measure the voltage output of the oxygen sensors with a multimeter to ensure they are functioning properly.
  5. 5Inspect the catalytic converter for physical damage or blockage.
  6. 6Perform a visual inspection of the exhaust system for any signs of rust or damage.

Solution

Solution

1. Preparation

  • Gather tools and parts needed for the repair.
  • Disconnect the battery to ensure safety during repairs.
  • Tools Required: OBD-II scanner, multimeter, socket set, torque wrench.

2. Inspect and Replace Oxygen Sensors

  • Sub-steps:
    1. Locate the upstream and downstream oxygen sensors on the exhaust manifold and exhaust pipe, respectively.
    2. Disconnect the electrical connectors from both oxygen sensors.
    3. Use a socket to remove the oxygen sensors from their mounting locations.
    4. Install new oxygen sensors, ensuring they are tightened to the manufacturer’s specified torque (typically around 30-35 ft-lbs).
    5. Reconnect the electrical connectors to the new sensors.

3. Examine and Replace Catalytic Converter (if necessary)

  • Sub-steps:
    1. Inspect the catalytic converter for any signs of damage or clogging.
    2. If replacement is necessary, remove the bolts or clamps securing the catalytic converter to the exhaust system.
    3. Carefully take out the old catalytic converter.
    4. Install the new catalytic converter, ensuring proper alignment and sealing.
    5. Torque the mounting hardware to the manufacturer’s specifications.
    6. Reconnect any exhaust hangers and sensors.

4. Clear Codes and Test Drive

  • Sub-steps:
    1. Reconnect the battery.
    2. Use an OBD-II scanner to clear the P0420 code from the vehicle’s computer.
    3. Take the vehicle for a test drive to ensure the issue does not return.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Socket set
  • Torque wrench

Parts Required

  • Upstream oxygen sensor
  • Downstream oxygen sensor
  • Catalytic converter (if defective)

Additional Information

Error CodeP0420
Component

Exhaust System

Repair Time

2-4 hours

Difficulty

medium

Severity

medium

Tools

4 items

Parts

3 items

Related Faults

  1. how to tell if my Ram 1500 DT (2019-Present) fuel pump is failing

    Learn how to diagnose and fix fuel pump issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms
  2. my Ram 1500 struggles to shift from park to drive what's wrong

    Learn how to diagnose and fix transmission shifting issues in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission5 symptoms
  3. why does my Ram 1500 DT (2019-Present) have poor throttle response?

    Learn how to diagnose and fix poor throttle response in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms
  4. why does my Ram 1500 DT (2019-Present) make a grinding noise when starting

    Learn how to diagnose and fix grinding noise during starting in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms
  5. how to diagnose Ram 1500 DT (2019-Present) differential noise

    Learn how to diagnose and fix differential noise in Ram 1500 DT (2019-present). Step-by-step guide with diagnostic procedures and repair instructions.

    Differential5 symptoms
  6. why does my Ram 1500 DT (2019-Present) have a coolant leak

    Learn how to diagnose and fix coolant leaks in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Cooling System6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation