FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P0700 code in Ram 1500 DT (2019-Present)

how to fix P0700 code in Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P07002-4 hours
3 min read
535 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0700
Component
Transmission
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow the vehicle to cool before handling the transmission.

Symptoms

  • •Check engine light illuminated
  • •Harsh or erratic shifting
  • •Transmission slipping or failing to engage
  • •Reduced power or acceleration
  • •Delayed engagement when shifting from park to drive

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostic system using an OBD-II scanner to confirm the P0700 code and retrieve additional transmission-related codes.
  2. 2Inspect the transmission fluid level and condition; ensure the fluid is at the correct level and is not burnt or contaminated.
  3. 3Check the wiring and connectors associated with the transmission control module (TCM) for any signs of damage or corrosion.
  4. 4Test the TCM functionality using a multimeter to check for proper voltage and ground signals.
  5. 5Inspect the vehicle's battery and charging system to ensure proper voltage is being supplied to the TCM.
  6. 6Verify the condition of the transmission range sensor (neutral safety switch) for proper operation.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the vehicle’s battery to ensure safety while working on electrical components.

2. Transmission Fluid Check

  • Locate the transmission dipstick (if applicable) or the fill port.
  • Remove the dipstick and wipe it clean, then reinsert and remove again to check the fluid level.
  • If low, add the manufacturer-recommended transmission fluid.

3. Inspect Wiring and Connectors

  • Visually inspect the wiring harness leading to the TCM and the transmission for any signs of fraying, corrosion, or disconnection.
  • Repair or replace any damaged wiring and ensure all connectors are secure.

4. Test the Transmission Control Module (TCM)

  • Locate the TCM, which is typically found near the transmission or engine compartment.
  • Use a multimeter to check for voltage at the TCM’s power and ground wires.
  • If the TCM is not receiving proper voltage, trace wiring back to the battery and inspect for issues.

5. Replace Faulty Components

  • If diagnostics indicate a faulty TCM or transmission range sensor, replace the component.
  • Follow manufacturer specifications for torque values and installation procedures.

6. Reconnect Battery and Clear Codes

  • Reconnect the battery terminals.
  • Use the OBD-II scanner to clear the P0700 code and any other related codes.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Socket set
  • Torque wrench
  • Screwdriver set

Parts Required

  • Transmission fluid (as specified by manufacturer)
  • Transmission control module (if faulty)
  • Transmission range sensor (if faulty)

Additional Information

Error CodeP0700
Component

Transmission

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) check engine light come on and off

    Learn how to diagnose and fix the intermittent check engine light issue on your Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  2. my Ram 1500 is hard to start when cold what's the issue

    Learn how to diagnose and fix cold start issues in Ram 1500. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine5 symptoms

  3. why does my Ram 1500 DT (2019-Present) feel like it's losing power while driving

    Learn how to diagnose and fix loss of power issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  4. why does my Ram 1500 DT (2019-Present) make a hissing sound when accelerating

    Learn how to diagnose and fix the hissing sound during acceleration in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  5. why does my Ram 1500 DT (2019-Present) smell like burning oil

    Learn how to diagnose and fix the burning oil smell in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Engine5 symptoms

  6. why does my Ram 1500 DT (2019-Present) have poor acceleration on the highway

    Discover how to diagnose and fix poor acceleration issues in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic steps and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation