FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to fix P2302 code in Ram 1500 DT (2019-Present)

how to fix P2302 code in Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P23021-2 hours
3 min read
516 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P2302 ignition coil B circuit issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P2302
Affected Component
Engine
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before performing any electrical repairs to prevent shock or short circuits.
  • ⚠Allow the engine to cool before working near the ignition system components.

Symptoms

  • •Check engine light illuminated
  • •Engine misfire or rough running
  • •Difficulty starting the engine
  • •Reduced engine power
  • •Increased fuel consumption
  • •Engine stalling

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostic system using an OBD-II scanner to confirm the P2302 code and check for any additional codes.
  2. 2Inspect the ignition coil B connector and wiring for any signs of damage or corrosion.
  3. 3Measure the resistance of the ignition coil B using a multimeter to determine if it is within the manufacturer's specifications.
  4. 4Check the vehicle's battery voltage and ensure it is within the normal operating range.
  5. 5Inspect the ignition control module (ICM) for proper operation and connections.
  6. 6Ensure that the engine grounds are secure and free from corrosion.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Repair Wiring

  • Sub-steps:
    • Visually inspect the wiring harness connected to ignition coil B for frays, cuts, or corrosion.
    • Use a continuity tester to check for any breaks in the wire.
    • Repair any damaged wiring using appropriate gauge wire and soldering techniques or crimp connectors.
    • Apply heat shrink tubing over repaired areas for insulation.

3. Replace Ignition Coil B

  • Tools Required:
    • Socket set
    • Torque wrench
    • Ratchet and extensions
    • Clean cloth
  • Sub-steps:
    • Remove the engine cover if applicable.
    • Disconnect the electrical connector from ignition coil B.
    • Remove the bolts securing the ignition coil using the socket set.
    • Gently pull the ignition coil B out of the cylinder head.
    • Install the new ignition coil by reversing the removal steps, ensuring it is seated properly.
    • Torque the bolts to the manufacturer’s specifications (typically around 89 in-lbs for most ignition coils).

4. Reconnect Battery and Clear Codes

  • Sub-steps:
    • Reconnect the negative battery terminal.
    • Start the engine and allow it to reach operating temperature.
    • Use the OBD-II scanner to clear any stored trouble codes.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Continuity tester

Parts Required

  • •Ignition coil B (specific to the Ram 1500 DT)
  • •Replacement wiring (if damaged)

Additional Information

Error Code
P2302
Affected Component
Engine
Estimated Time
1-2 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) have a fuel smell in the cabin

    Learn how to diagnose and fix fuel smell in the cabin of your Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System5 symptoms

  2. why does my Ram 1500 DT (2019-Present) have poor acceleration

    Learn how to diagnose and fix poor acceleration issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  3. how to fix the P0171 code in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix P0171 engine too lean condition in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0171Engine6 symptoms

  4. what are the common causes of shaking in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix shaking issues in your Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension6 symptoms

  5. how to diagnose a rough idle in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix rough idle issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  6. why does my Ram 1500 DT (2019-Present) have a knocking noise when idling

    Diagnose and fix knocking noise at idle in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation