how to fix Ram 1500 DT (2019-Present) noise when going over bumps?

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

472 words

Problem Statement

Learn how to diagnose and fix noise when going over bumps in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is on a flat surface and the parking brake is engaged before starting work.

Symptoms

•Clunking or rattling noise when traversing bumps
•Noise may increase with speed over uneven surfaces
•Deterioration in ride comfort and handling
•Possible vibrations through the steering wheel
•Visual inspection may show worn or damaged suspension components

Diagnostic Steps

1
Inspect suspension components visually for wear, damage, or loose fasteners.
2
Check the condition of the shock absorbers for leakage or signs of failure.
3
Perform a bounce test on each corner of the truck to assess shock absorber functionality.
4
Inspect the sway bar links and bushings for signs of wear or damage.
5
Check for loose exhaust components that may be causing noise during bumps.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Wrench set
•Torque wrench
•Jack and jack stands
•Screwdriver set
•OBD-II scanner

Parts Required

•Replacement shock absorbers
•Sway bar links
•Sway bar bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect suspension components visually for wear, damage, or loose fasteners.
2
Check the condition of the shock absorbers for leakage or signs of failure.
3
Perform a bounce test on each corner of the truck to assess shock absorber functionality.
4
Inspect the sway bar links and bushings for signs of wear or damage.
5
Check for loose exhaust components that may be causing noise during bumps.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Worn Components

Shock Absorbers:
- Remove the wheel to access the shock absorber.
- Unbolt the upper and lower mounting points using a socket set.
- Remove the shock absorber and inspect for leaks or damage; replace if necessary.
- Install the new shock absorber, ensuring proper alignment and torque to manufacturer specifications (usually around 50-70 ft-lbs).
Sway Bar Links and Bushings:
- Locate the sway bar and inspect links and bushings.
- Remove the sway bar links using a wrench and socket.
- Replace bushings if cracked or worn; install new sway bar links with specified torque (typically 30-40 ft-lbs).

3. Reassemble

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to manufacturer specifications (usually around 100-120 ft-lbs).
Reconnect the battery.