how to reset my Ram 1500 DT (2019-Present) service light

Ram 1500 DT (2019-Present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Learn how to reset the service light on your Ram 1500 DT (2019-Present). Step-by-step instructions for diagnostics and reset procedures.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in a safe position before performing any resets.
•Do not start the engine while connected to the OBD-II scanner unless instructed by the device's manual.

Symptoms

•Service light illuminated on the dashboard
•Possible warning messages displayed on the driver information center
•No changes in engine performance or vehicle operation
•Recent maintenance or service performed (oil change, tire rotation, etc.)
•Vehicle is due for scheduled maintenance based on mileage or time

Diagnostic Steps

1
Verify the reason for the service light by checking the vehicle's maintenance schedule.
2
Use an OBD-II scanner to check for any stored trouble codes.
3
Ensure all recent maintenance tasks have been completed as per the schedule.
4
Confirm that no additional issues or warning lights are present that could require attention.
5
Attempt to reset the service light through the vehicle’s onboard settings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None specifically for resetting the service light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Service light illuminated on the dashboard

•Possible warning messages displayed on the driver information center

•No changes in engine performance or vehicle operation

•Recent maintenance or service performed (oil change, tire rotation, etc.)

•Vehicle is due for scheduled maintenance based on mileage or time

Diagnostic Steps

1
Verify the reason for the service light by checking the vehicle's maintenance schedule.
2
Use an OBD-II scanner to check for any stored trouble codes.
3
Ensure all recent maintenance tasks have been completed as per the schedule.
4
Confirm that no additional issues or warning lights are present that could require attention.
5
Attempt to reset the service light through the vehicle’s onboard settings.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if needed), vehicle owner's manual.
Ensure the vehicle is parked on a level surface with the engine off.

2. Using the Instrument Cluster

Turn the ignition key to the "ON" position without starting the engine.
On the steering wheel, press the "OK" button to access the main menu on the driver information center.
Scroll to "Vehicle Info" or "Maintenance," depending on your display options.
Locate the "Oil Change" or "Service Interval" section.
Select "Reset" and confirm the action when prompted.

3. Using OBD-II Scanner (if applicable)

Plug the OBD-II scanner into the diagnostic port located under the dashboard.
Turn the ignition key to the "ON" position without starting the engine.
Follow the scanner's prompts to access the “Reset” or “Clear Codes” function.
Select the service light reset option, then confirm the reset.