how to reset the check engine light on my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

378 words

Problem Statement

Learn how to reset the check engine light on your 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before starting the procedure.

Symptoms

•Check engine light illuminated on the dashboard
•Possible stored trouble codes in the OBD-II system
•No noticeable performance issues

Diagnostic Steps

1
Ensure the vehicle is parked in a safe and level area, and the engine is turned off.
2
Connect an OBD-II scanner to the vehicle's diagnostic port, typically located under the dashboard near the steering column.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Follow the scanner's instructions to access the engine control unit (ECU) and retrieve any error codes.
5
Note any trouble codes that are present and clear them using the scanner's menu options.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked in a safe and level area, and the engine is turned off.
2
Connect an OBD-II scanner to the vehicle's diagnostic port, typically located under the dashboard near the steering column.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Follow the scanner's instructions to access the engine control unit (ECU) and retrieve any error codes.
5
Note any trouble codes that are present and clear them using the scanner's menu options.

Solution

1. Preparation

Ensure the vehicle is in a well-ventilated area and parked securely.
Gather tools: OBD-II scanner.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard.
Plug the OBD-II scanner into the port securely.

3. Turn Ignition On

Insert the key into the ignition and turn it to the "ON" position (do not start the engine).

4. Access and Clear Codes

Use the scanner's interface to navigate to the section for reading or clearing trouble codes.
Select the option to clear or reset the check engine light.
Confirm the action as prompted by the scanner.

5. Disconnect Scanner

Once the codes are cleared, safely remove the OBD-II scanner from the port.