how to reset the maintenance light on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the maintenance light on your Ram 1500 DT (2019-Present) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a stable position and not in motion while performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Message indicating 'Oil Change Due' or similar maintenance alerts
•Possible reminders related to tire rotations or other scheduled maintenance

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the dashboard for any changes in the maintenance light status.
4
If the light does not turn off, turn the ignition off and repeat the process.
5
Confirm that the vehicle's odometer reading is displayed, not trip or other settings.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the dashboard for any changes in the maintenance light status.
4
If the light does not turn off, turn the ignition off and repeat the process.
5
Confirm that the vehicle's odometer reading is displayed, not trip or other settings.

Solution

1. Preparation

Ensure the vehicle is in a safe, well-ventilated area.
Have the vehicle in "Park" mode with the ignition off.

2. Turn Ignition On

Insert the key or press the start button to turn the ignition to the "ON" position without starting the engine.

3. Reset the Maintenance Light

Step 1: Press the accelerator pedal down three times quickly (within 10 seconds).
Step 2: Observe the dashboard for the maintenance light to turn off.
Step 3: If the light remains on, turn the ignition off and repeat the previous step.

4. Confirm Reset

Turn the ignition off and then back to the "ON" position to check if the maintenance light is off.