how to resolve a P0135 code in my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0135

3 min read

492 words

Problem Statement

Learn how to diagnose and fix P0135 oxygen sensor heater circuit issues in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0135

Affected Component

Exhaust System

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working near the exhaust components.

Symptoms

•Check engine light illuminated
•Poor fuel economy
•Rough idle
•Increased emissions
•Engine stalling or hesitation during acceleration

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner to confirm the P0135 code and check for any additional codes.
2
Visually inspect the wiring and connector of the Bank 1 Sensor 1 oxygen sensor for any signs of damage, corrosion, or loose connections.
3
Measure the resistance of the oxygen sensor heater element using a multimeter to ensure it is within specification.
4
Check the fuse related to the oxygen sensor heater circuit in the fuse box.
5
Test the voltage supply to the oxygen sensor heater circuit with the engine running to ensure proper voltage is present.
6
Inspect the ECM for any issues or updates that may affect the oxygen sensor performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench

Parts Required

•Oxygen sensor (Bank 1 Sensor 1)
•Electrical contact cleaner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner to confirm the P0135 code and check for any additional codes.
2
Visually inspect the wiring and connector of the Bank 1 Sensor 1 oxygen sensor for any signs of damage, corrosion, or loose connections.
3
Measure the resistance of the oxygen sensor heater element using a multimeter to ensure it is within specification.
4
Check the fuse related to the oxygen sensor heater circuit in the fuse box.
5
Test the voltage supply to the oxygen sensor heater circuit with the engine running to ensure proper voltage is present.
6
Inspect the ECM for any issues or updates that may affect the oxygen sensor performance.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the battery to prevent electrical shorts.
Tools Required: OBD-II scanner, multimeter, socket set, and torque wrench.

2. Inspect and Repair Wiring

If any damage or corrosion is found during the visual inspection, repair or replace the damaged wiring or connectors.
Use electrical contact cleaner to clean connectors and ensure a solid connection.

3. Replace Oxygen Sensor

Locate the Bank 1 Sensor 1 oxygen sensor (usually located before the catalytic converter).
Using a socket set, carefully remove the old oxygen sensor.
Apply anti-seize compound to the threads of the new oxygen sensor.
Install the new oxygen sensor and tighten to the manufacturer’s specified torque (typically around 30 lb-ft).

4. Reconnect Battery and Clear Codes

Reconnect the battery terminals.
Use the OBD-II scanner to clear the P0135 code from the ECM.

5. Test Drive

Start the engine and allow it to reach operating temperature.
Conduct a test drive to monitor performance and ensure the check engine light does not reappear.