how to resolve low oil pressure in my Ram 1500 DT (2019-Present)

Solution

1. Preparation

• Gather all tools and parts required for the repair.
• Park the vehicle on a flat surface and ensure the engine is cool.
• Disconnect the negative battery terminal to avoid electrical issues.

2. Check and Replace Engine Oil

• Tools Required: Socket set, oil filter wrench, oil drain pan, funnel.
• Drain the existing oil using the oil drain pan. Remove the oil drain plug and allow the oil to fully drain.
• Replace the oil filter using an oil filter wrench. Lubricate the rubber O-ring on the new filter with a little oil before installation.
• Reinstall the drain plug and tighten it to the manufacturer's torque specification (typically around 20-25 ft-lbs).
• Fill the engine with the recommended oil type (check owner's manual for specifications) using a funnel.

3. Inspect and Replace Oil Pump (if necessary)

• Tools Required: Torque wrench, socket set, oil pump removal tool.
• Remove the oil pan by loosening the bolts with a socket set. Carefully detach the pan and set it aside.
• Disconnect the oil pump from the engine by unscrewing the bolts connecting it to the engine block.
• Remove the old oil pump and install a new one, ensuring a proper seal.
• Reattach the oil pan and tighten all bolts to the specified torque values.
• Reconnect the battery terminal.

4. System Check

• Start the engine and let it idle.
• Monitor the oil pressure gauge to ensure the pressure returns to normal levels.
• Inspect for any leaks around the oil filter and oil pan.