FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to resolve U0101 code in my Ram 1500 DT (2019-Present)?

how to resolve U0101 code in my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: U01012-4 hours
3 min read
493 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix U0101 code indicating lost communication with TCM in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
U0101
Affected Component
Transmission
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the vehicle to cool before inspecting components near the engine and transmission.

Symptoms

  • •Check engine light illuminated
  • •Transmission shifting issues (harsh or erratic shifts)
  • •Engine stalling or lack of power during acceleration
  • •Inability to engage in certain gears (e.g., stuck in limp mode)
  • •Poor fuel economy

Diagnostic Steps

  1. 1Scan the vehicle's OBD-II system using a compatible scanner to confirm the U0101 code and check for any additional codes.
  2. 2Inspect the TCM connectors and wiring harness for signs of damage, corrosion, or loose connections.
  3. 3Check the vehicle's battery voltage and grounds to ensure proper electrical supply.
  4. 4Inspect the CAN (Controller Area Network) wiring for continuity and signs of damage.
  5. 5Verify the condition of the fuses related to the transmission and TCM in the fuse box.
  6. 6Clear the fault codes and perform a test drive to see if the code reappears.

Solution

Solution

1. Preparation

  • Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, wire brush, and electrical contact cleaner.
  • Disconnect the vehicle battery negative terminal to prevent electrical shock.

2. Inspect Wiring and Connectors

  • Sub-steps:
    1. Remove the TCM connector by releasing the locking mechanism.
    2. Visually inspect the connector for corrosion or bent pins. Clean with electrical contact cleaner if necessary.
    3. Use a multimeter to check for continuity in the wiring harness between the ECM and TCM.
    4. Repair any damaged wires or connectors as needed.

3. Check Fuse and Power Supply

  • Sub-steps:
    1. Locate the fuse box and identify the fuses related to the transmission and TCM.
    2. Inspect each fuse for continuity; replace any blown fuses with the correct amperage.
    3. Check the battery voltage using a multimeter; it should be between 12.4V and 12.7V.

4. Reconnect Components

  • Sub-steps:
    1. Reconnect the TCM connector securely after cleaning.
    2. Reconnect the vehicle battery negative terminal.
    3. Clear any stored fault codes using the OBD-II scanner.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Wire brush
  • •Electrical contact cleaner

Parts Required

  • •TCM connector (if damaged)
  • •Fuses (if blown)

Additional Information

Error Code
U0101
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
2 items

Related Faults

  1. my Ram 1500 DT (2019-Present) has a hard start in the morning, why

    Learn how to diagnose and fix hard starting issues in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System5 symptoms
  2. why is my Ram 1500 DT (2019-Present) experiencing transmission fluid leaks

    Learn how to diagnose and fix transmission fluid leaks in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Transmission5 symptoms
  3. why does my Ram 1500 DT (2019-Present) vibrate when I brake

    Learn how to diagnose and fix brake vibration issues in your 2019 Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes5 symptoms
  4. why does my Ram 1500 DT (2019-Present) have a check engine light after oil change

    Learn how to diagnose and fix the check engine light issue after an oil change in a Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms
  5. how to fix the brakes on my Ram 1500 DT (2019-Present) that go to the floor

    Learn how to fix the brake pedal sinking issue in 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

    Brakes5 symptoms
  6. why is my Ram 1500 DT (2019-Present) battery draining overnight

    Learn how to diagnose and fix battery drain issues in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation