FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/how to troubleshoot B1C00 code on my Ram 1500 DT (2019-Present)?

how to troubleshoot B1C00 code on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
Severity: mediumDifficulty: mediumError Code: B1C001-3 hours
3 min read
556 words

Problem Statement

Learn how to troubleshoot and fix B1C00 code issues in your 2019 Ram 1500 DT. Step-by-step guide with diagnostic steps and repair instructions.

Error Code
B1C00
Component
Electrical
Repair Time
1-3 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components to prevent shocks or shorts.

Symptoms

  • •Check engine light illuminated
  • •Inconsistent electronic accessory operation (e.g., windows, locks)
  • •Door locks malfunctioning or not responding
  • •Instrument cluster displaying erratic readings
  • •Difficulty starting the vehicle
  • •Battery drain occurring unexpectedly

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the B1C00 code and check for any additional codes.
  2. 2Inspect the battery terminals and cables for corrosion, looseness, or damage.
  3. 3Check the voltage of the battery using a multimeter to ensure it is within the acceptable range (12.4V to 12.7V).
  4. 4Inspect the fuses related to the BCM and other electrical systems for any blown fuses.
  5. 5Examine the wiring harness and connectors leading to the BCM for signs of wear, damage, or poor connections.
  6. 6Perform a visual inspection of the BCM for any signs of physical damage or water ingress.

Solution

Solution

1. Preparation

  • Gather tools such as a multimeter, OBD-II scanner, and basic hand tools.
  • Ensure the vehicle is parked in a safe location with the engine off.
  • Disconnect the negative battery terminal to avoid electrical shorts.

2. Battery Inspection

  • Sub-step 1: Inspect battery terminals for corrosion and clean them using a wire brush if necessary.
  • Sub-step 2: Ensure the battery cables are tight and secure.
  • Sub-step 3: If the battery voltage is low, charge the battery or replace it if it cannot hold a charge.

3. Fuse Check

  • Sub-step 1: Locate the fuse box in the engine compartment and under the dashboard.
  • Sub-step 2: Remove and inspect fuses related to the BCM and other electronic systems.
  • Sub-step 3: Replace any blown fuses with the same amperage rating.

4. Wiring and Connector Inspection

  • Sub-step 1: Visually inspect the wiring harness leading to the BCM for any signs of damage or fraying.
  • Sub-step 2: Disconnect the connectors to the BCM and inspect for corrosion or bent pins.
  • Sub-step 3: Clean the connectors with an electrical contact cleaner and reconnect them securely.

5. BCM Reset

  • Sub-step 1: Reconnect the negative battery terminal.
  • Sub-step 2: Use the OBD-II scanner to clear the B1C00 code and any other related codes.
  • Sub-step 3: Start the vehicle and monitor for any reoccurrence of the code.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Multimeter
  • Wire brush
  • Basic hand tools (screwdrivers, pliers)

Parts Required

  • Replacement fuses (if necessary)
  • New battery (if existing battery is faulty)

Additional Information

Error CodeB1C00
Component

Electrical

Repair Time

1-3 hours

Difficulty

medium

Severity

medium

Tools

4 items

Parts

2 items

Related Faults

  1. my Ram 1500 DT (2019-Present) is shaking at idle what should I do

    Learn how to diagnose and fix engine shaking at idle in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  2. how to fix Ram 1500 DT (2019-Present) check engine light P0420 code

    Learn how to diagnose and fix P0420 catalytic converter efficiency issue in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    P0420Exhaust System5 symptoms

  3. why does my Ram 1500 DT (2019-Present) battery die after a few days

    Learn how to diagnose and fix battery drain issues in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Electrical5 symptoms

  4. why does my Ram 1500 DT (2019-Present) have poor acceleration

    Learn how to diagnose and fix poor acceleration issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

  5. my Ram 1500 DT (2019-Present) battery dies after a few days, what could be wrong

    Learn how to diagnose and fix battery discharge issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

    Electrical6 symptoms

  6. how to diagnose a rough idle in my Ram 1500 DT (2019-Present)

    Learn how to diagnose and fix rough idle issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation