FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ram/1500/DT (2019-Present)/my Ram 1500 DT (2019-Present) has a check engine light and code P0302, what should I do?

my Ram 1500 DT (2019-Present) has a check engine light and code P0302, what should I do?

Ram 1500 DT (2019-Present)

Error Codes
Severity: highDifficulty: mediumError Code: P03022-4 hours
3 min read
579 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before beginning repairs to prevent burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle when the engine is running
  • •Decreased engine power during acceleration
  • •Increased fuel consumption
  • •Engine may stall intermittently

Diagnostic Steps

  1. 1Scan the vehicle using an OBD-II scanner to confirm the P0302 code and check for any additional codes.
  2. 2Inspect the spark plug and ignition coil for cylinder 2 for signs of wear or damage.
  3. 3Check the fuel injector operation for cylinder 2 to ensure it is functioning properly.
  4. 4Perform a compression test on cylinder 2 to assess the engine’s internal condition.
  5. 5Inspect for vacuum leaks around the intake manifold that may affect cylinder 2.
  6. 6Check the engine’s wiring harness and connectors related to the ignition and fuel systems for damage or corrosion.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Spark Plug

  • Remove the engine cover if applicable.
  • Locate the spark plug for cylinder 2.
  • Using a spark plug socket, remove the spark plug.
  • Inspect the spark plug for wear, carbon buildup, or damage; replace if necessary.
  • Install a new spark plug (use manufacturer-recommended specifications) and torque to the specified value (typically around 13-15 lb-ft).

3. Inspect and Replace Ignition Coil

  • Disconnect the ignition coil connector for cylinder 2.
  • Remove the mounting bolts and take out the ignition coil.
  • Inspect for cracks or damage; replace if needed.
  • Install the new ignition coil, secure it with bolts, and reconnect the wiring harness.

4. Check and Replace Fuel Injector

  • Disconnect the fuel injector connector for cylinder 2.
  • Remove the injector by unscrewing the retaining clips or bolts.
  • Inspect the injector for clogging or damage.
  • Replace with a new fuel injector if necessary.
  • Reinstall the injector, reconnect the wiring, and ensure it is seated properly.

5. Verify Compression

  • Reattach the compression tester to the spark plug hole for cylinder 2.
  • Crank the engine to check compression reading; it should be within manufacturer specifications (usually around 120-160 psi).
  • If compression is low, further inspection of the engine internals may be required.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Spark plug socket
  • Torque wrench
  • Compression tester
  • Basic hand tools (sockets, ratchets, screwdrivers)

Parts Required

  • Spark plug (for cylinder 2)
  • Ignition coil (for cylinder 2)
  • Fuel injector (for cylinder 2)

Additional Information

Error CodeP0302
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

5 items

Parts

3 items

Related Faults

  1. why does my Ram 1500 DT (2019-Present) AC blow warm air

    Complete guide to fixing AC that blows warm air in Ram 1500 DT. Includes symptoms, diagnostic steps, tools required, and repair procedures.

    HVAC6 symptoms

  2. my Ram 1500 DT (2019-Present) battery dies after a few days, what could be wrong

    Learn how to diagnose and fix battery discharge issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

    Electrical6 symptoms

  3. my Ram 1500 DT (2019-Present) has a hard start in the morning, why

    Learn how to diagnose and fix hard starting issues in Ram 1500 DT (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

    Fuel System5 symptoms

  4. why does my Ram 1500 DT (2019-Present) have a delay in shifting

    Learn how to diagnose and fix transmission delay issues in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Transmission6 symptoms

  5. why does my Ram 1500 DT (2019-Present) smell like burnt rubber

    Learn how to diagnose and fix burnt rubber smell in Ram 1500 DT (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Brakes5 symptoms

  6. why is my Ram 1500 DT (2019-Present) making a popping noise in the front end?

    Learn how to diagnose and fix popping noise in the front end of your Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation